TS3DV520RHURG4 Datasheet, PDF (1/20 Pages) Texas Instruments – 5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS

TS3DV520
www.ti.com
SCDS197D – DECEMBER 2005 – REVISED OCTOBER 2009
5-CHANNEL DIFFERENTIAL 10:20 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS
Check for Samples: TS3DV520
FEATURES
1
• Compatible With HDMI v1.2a (Type A) DVI 1.0
High-Speed Digital Interface
– Wide Bandwidth of Over 1.65 Gbps
(Bandwidth 2.4 Gbps Typ)
– 165-MHz Speed Operation
– Serial Data Stream at 10× Pixel Clock Rate
– Supports All Video Formats up to 1080p
and SXGA (1280 × 1024 at 75 Hz)
– Total Raw Capacity 4.95 Gbps (Single Link)
– HDCP Compatible
• Low Crosstalk (X_TALK = –41 dB Typ)
• Low Bit-to-Bit Skew (t_sk(o) = 0.1 ns Max)
• Low and Flat ON-State Resistance
(r_on = 6 Ω Max, r_on(flat) = 0.5 Ω Typ)
• Low Input/Output Capacitance
(C_ON = 7.8 pF Typ)
• Rail-to-Rail Switching on Data I/O Ports
(0 to 5 V)
• V_CC Operating Range From 3 V to 3.6 V
• I_off Supports Partial-Power-Down Mode
Operation
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
TQFN PACKAGE
(TOP VIEW)
GND 1
A₀ 2
A₁ 3
V_CC 4
NC ⁵
GND 6
A₂ 7
A₃ 8
GND 9
V_CC 10
A₄ 11
A₅ 12
GND 13
A₆ 14
A₇ 15
GND 16
SEL 17
V_CC 18
A₈ 19
A₉ 20
48 0B₁
47 1B₁
46 0B₂
45 1B₂
44 GND
43 2B₁
42 3B₁
41 2B₂
40 3B₂
39 GND
38 V_CC
37 4B₁
36 5B1
35 4B₂
34 5B₂
33 GND
32 6B₁
31 7B1
30 6B2
29 7B₂
NC – No internal connection
APPLICATIONS
• DVI/HDMI Signal Switching
• Differential DVI, HDMI Signal Multiplexing for
Audio/Video Receivers and High-Definition
Televisions (HDTVs)
• 10/100/1000 Base-T Signal Switching
• Hub and Router Signal Switching
DESCRIPTION/ORDERING INFORMATION
The TS3DV520 is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input.
SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for
digital video signal switching. This device can also be used to replace mechanical relays in LAN applications and
allows for signals to be routed from a 10/100/1000 Base-T transceiver to the RJ-45 connectors in laptops or
docking stations.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2009, Texas Instruments Incorporated