TRF7960_07 Datasheet, PDF (1/7 Pages) Texas Instruments – Multi-Standard Fully Integrated 13.56-MHz Radio Frequency Identification (RFID) Analog Front End and Data Framing Reader System

TRF7960/61
www.ti.com
SLOS504B – AUGUST 2006 – REVISED APRIL 2007
Multi-Standard Fully Integrated 13.56-MHz Radio Frequency Identification (RFID) Analog
Front End and Data Framing Reader System
FEATURES
• Completely Integrated Protocol Handling
(OSI Model Layer 3 and Below)
• Separate Internal High-PSRR Power Supplies
for Analog, Digital, and PA Sections Provides
Noise Isolation for Superior Read Range and
Reliability
• Dual Receiver Input With AM and PM
Demodulation to Minimize Communication
Holes (Patent Pending).
• Receiver AM and PM RSSI
• Reader-to-Reader Anti-Collision
• High Integration Reduces Total BOM and
Board Area
– Single External 13.56-MHz Cystal Oscillator
– MCU-Selectable Clock-Fequency Output of
RF, RF/2, or RF/4
– Adjustable 20-mA, High-PSRR LDO for
Powering External MCU
• Easy to Use With High Flexibility
– Auto-Configured Default Modes for Each
Spported ISO Protocol
– 11 User-Programmable Registers
– Selectable Receiver Gain and AGC
– Programmable Output Power
(100 mW or 200 mW)
– Adjustable ASK Modulation Range
(8% to 30%)
– Built-In Receiver Band-Pass Filter With
User-Selectable Corner Frequencies
• Wide Operating Voltage Range of 2.7 V to
5.5 V
• Ultralow-Power Modes
– Power Down < 1 µA
– Standby 120 µA
– Active (Rx only) 10 mA
• Parallel 8-Bit or Serial 4-Pin SPI Interface With
MCU Using 12-Byte FIFO
• Ultrasmall 32-Pin QFN Package (5 mm ×
5 mm)
• Available tools
– Reference Design/EVM With Development
Software
– Source Code Available for MSP430
APPLICATIONS
• Secure Access Control
• Product Authentication
– Printer Ink Cartridges
– Blood Gucose Monitors
• Contactless Payment Systems
DESCRIPTION
The TRF7960/61 is an integrated analog front end
and data framing system for a 13.56-MHz RFID
reader system. Built-in programming options make it
suitable for a wide range of applications both in
proximity and vicinity RFID systems.
The reader is configured by selecting the desired
protocol in the control registers. Direct access to all
control registers allows fine tuning of various reader
parameters as needed.
DEVICE
TRF7960
TRF7961
106 kbps
X
Table 1. PRODUCT SELECTION TABLE
PROTOCOLS
ISO14443A/B
212 kbps
424 kbps
848 kbps
X
X
X
ISO15693
ISO18000-3
X
X
Tag-it™
X
X
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Tag-it is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2007, Texas Instruments Incorporated