TPS7A3401_15 Datasheet, PDF (1/27 Pages) Texas Instruments – TPS7A3401 –20-V, –200-mA, Low-Noise Negative Voltage Regulator

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS7A3401
SBVS163A – JUNE 2011 – REVISED MAY 2015
TPS7A3401 –20-V, –200-mA, Low-Noise Negative Voltage Regulator
1 Features
•1 Input Voltage Range: –3 V to –20 V
• Noise:
– 80 μV_RMS (10 Hz to 100 kHz)
• Power-Supply Ripple Rejection:
– 50 dB (1 kHz)
– ≥ 27 dB (10 Hz to 1 MHz)
• Adjustable Output:
Approximately –1.18 V to –18 V
• Maximum Output Current: 200 mA
• Dropout Voltage: 500 mV at 100 mA
• Stable With Ceramic Capacitors ≥ 2.2 μF
• CMOS Logic-Level-Compatible Enable Pin
• Built-In, Fixed, Current Limit, and Thermal
Shutdown Protection
• Available in High Thermal Performance MSOP-8
PowerPAD™ Package
• Operating Temperature Range: –40°C to 125°C
2 Applications
• Cost-Effective Supply Rails for Op Amps, DACs,
ADCs, and Other High-Precision Analog Circuitry
• Cost-Effective Post DC-DC Converter Regulation
and Ripple Filtering
3 Description
The TPS7A3401 device is a negative, high-voltage
(–20-V), low-noise linear regulator capable of
sourcing a maximum load of 200 mA.
These linear regulators include a CMOS logic-level-
compatible enable pin. Other features available
include built-in current limit and thermal shutdown
protection to safeguard the device and system during
fault conditions.
The TPS7A3401 is designed using bipolar
technology, and is ideal for instrumentation
applications where clean voltage rails are critical for
improving system performance. This design makes it
a cost-effective choice to power operational
amplifiers, analog-to-digital converters (ADCs),
digital-to-analog converters (DACs), and other analog
circuitry.
In addition, the TPS7A3401 linear regulator is
suitable for cost-effective, post DC-DC converter
regulation. By filtering out the output voltage ripple
inherent to DC-DC switching conversion, increased
system performance is provided in instrumentation
applications.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS7A3401
HVSSOP (8)
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Post DC-DC Converter Regulation
+18V
-18V
IN OUT
+15V
TPS7A49
EN GND
IN OUT
-15V
TPS7A34
EN GND
EVM
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.