TPS767D301-EP_15 Datasheet, PDF (1/22 Pages) Texas Instruments – DUAL-OUTPUT LOW-DROPOUT LINEAR REGULATOR

TPS767D301-EP
www.ti.com
SGLS327A – FEBRUARY 2006 – REVISED APRIL 2010
DUAL-OUTPUT LOW-DROPOUT LINEAR REGULATOR
Check for Samples: TPS767D301-EP
FEATURES
1
• Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
• Extended Temperature Performance of –55°C
to 125°C
• Enhanced Diminishing Manufacturing Sources
(DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree
Component qualification in accordance with JEDEC and industry
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life. Such qualification testing
should not be viewed as justifying use of this component beyond
specified
performance and environmental limits.
• Dual Output Voltages for Split-Supply
Applications
• Output Current Range of 0 mA to 1.0 A Per
Regulator
• 3.3-V/Adjustable Output
• Fast Transient Response
• 3% Tolerance Over Load and Temperature
• Dropout Voltage Typically 350 mV at 1 A
• Ultra-Low 85-mA Typical Quiescent Current
• 1-mA Quiescent Current During Shutdown
• Dual Open-Drain Power-On Reset With
200-ms Delay for Each Regulator
• 28-Pin PowerPAD™ TSSOP Package
• Thermal Shutdown Protection for Each
Regulator
PWP PACKAGE
(TOP VIEW)
NC
1
NC
2
1GND
3
1EN
4
1IN
5
1IN
6
NC
7
NC
8
2GND
9
2EN
10
2IN
11
2IN
12
NC
13
NC
14
28
1RESET
27
NC
26
NC
25
1FB/NC
24
1OUT
23
1OUT
22
2RESET
21
NC
20
NC
19
NC
18
2OUT
17
2OUT
16
NC
15
NC
NC − No internal connection
DESCRIPTION/ORDERING INFORMATION
The TPS767D301-EP dual-voltage regulator offers fast transient response, low dropout (LDO) voltages, and dual
outputs in a compact package and incorporates stability with 10-mF low-ESR output capacitors.
The TPS767D301-EP dual-voltage regulator is designed primarily for DSP applications. This device can be used
in any mixed-output voltage application, with each regulator supporting up to 1 A. Dual active-low reset (RESET)
signals allow resetting of core logic and I/O separately.
T_J
–55°C to 125°C
Table 1. ORDERING INFORMATION
REGULATOR 1
V_O
Adjustable (1.5 V to 5.5 V)
REGULATOR 2
V_O
3.3 V
TSSOP (PWP)
TPS767D301MPWPREP
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2010, Texas Instruments Incorporated