TPS732XX Datasheet, PDF (1/23 Pages) Texas Instruments – Cap-Free, NMOS, 250mA Low Dropout Regulator with Reverse Current Protection

TPS732xx
www.ti.com
SBVS037I – AUGUST 2003 – REVISED MAY 2006
Cap-Free, NMOS, 250mA Low Dropout Regulator
with Reverse Current Protection
FEATURES
• Stable with No Output Capacitor or Any Value
or Type of Capacitor
• Input Voltage Range: 1.7V to 5.5V
• Ultralow Dropout Voltage: 40mV Typ at
250mA
• Excellent Load Transient Response—with or
without Optional Output Capacitor
• New NMOS Topology Provides Low Reverse
Leakage Current
• Low Noise: 30µV_RMS Typ (10kHz to 100kHz)
• 0.5% Initial Accuracy
• 1% Overall Accuracy (Line, Load, and
Temperature)
• Less Than 1µA Max I_Q in Shutdown Mode
• Thermal Shutdown and Specified Min/Max
Current Limit Protection
• Available in Multiple Output Voltage Versions
– Fixed Outputs of 1.20V to 5.0V
– Adjustable Outputs from 1.20V to 5.5V
– Custom Outputs Available
APPLICATIONS
• Portable/Battery-Powered Equipment
• Post-Regulation for Switching Supplies
• Noise-Sensitive Circuitry such as VCOs
• Point of Load Regulation for DSPs, FPGAs,
ASICs, and Microprocessors
Optional
V_IN
IN
OUT
TPS732xx
EN GND NR
Optional
V_OUT
DESCRIPTION
The TPS732xx family of low-dropout (LDO) voltage
regulators uses a new topology: an NMOS pass
element in a voltage-follower configuration. This
topology is stable using output capacitors with low
ESR, and even allows operation without a capacitor.
It also provides high reverse blockage (low reverse
current) and ground pin current that is nearly
constant over all values of output current.
The TPS732xx uses an advanced BiCMOS process
to yield high precision while delivering very low
dropout voltages and low ground pin current. Current
consumption, when not enabled, is under 1µA and
ideal for portable applications. The extremely low
output noise (30µV_RMS with 0.1µF C_NR) is ideal for
powering VCOs. These devices are protected by
thermal shutdown and foldback current limit.
DBV PACKAGE
SOT23
(TOP VIEW)
DCQ PACKAGE
SOT223
(TOP VIEW)
TAB IS GND
IN
1
5
OUT
GND
2
EN
3
4
NR/FB
12 345
IN
GND EN
OUT NR/FB
DRB PACKAGE
3mm x 3mm SON
(TOP VIEW)
OUT 1
N/C 2
NR/FB 3
GND 4
8 IN
7 N/C
6 N/C
5 EN
Optional
Typical Application Circuit for Fixed-Voltage Versions
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2006, Texas Instruments Incorporated