TPS73101 Datasheet, PDF (1/16 Pages) Texas Instruments – Cap-Free, NMOS, 150mA Low Dropout Regulator with Reverse Current Protection

www.ti.com
TPS73101, TPS73115, TPS73118
TPS73125, TPS73130, TPS73132
TPS73133, TPS73150
SBVS034E – SEPTEMBER 2003 – REVISED SEPTEMBER 2004
Cap-Free, NMOS, 150mA Low Dropout Regulator
with Reverse Current Protection
FEATURES
• Stable with No Output Capacitor or Any Value
or Type of Capacitor
• Input Voltage Range of 1.7V to 5.5V
• Ultralow Dropout Voltage: 30mV Typ
• Excellent Load Transient Response—with or
without Optional Output Capacitor
• New NMOS Topology Provides Low Reverse
Leakage Current
• Low Noise: 30µV_RMS Typ (10kHz to 100kHz)
• 0.5% Initial Accuracy
• 1% Overall Accuracy over Line, Load, and
Temperature
• Less Than 1µA Max I_Q in Shutdown Mode
• Thermal Shutdown and Specified Min/Max
Current Limit Protection
• Available in Multiple Output Voltage Versions
– Fixed Outputs of 1.2V, 1.5V, 1.8V, 2.5V, 3.0V,
3.3V, and 5.0V
– Adjustable Outputs From 1.20V to 5.5V
– Custom Outputs Available
APPLICATIONS
• Portable/Battery-Powered Equipment
• Post-Regulation for Switching Supplies
• Noise-Sensitive Circuitry such as VCOs
• Point of Load Regulation for DSPs, FPGAs,
ASICs, and Microprocessors
DESCRIPTION
The TPS731xx family of low-dropout (LDO) linear
voltage regulators uses a new topology: an NMOS
pass element in a voltage-follower configuration. This
topology is stable using output capacitors with low
ESR, and even allows operation without a capacitor.
It also provides high reverse blockage (low reverse
current) and ground pin current that is nearly constant
over all values of output current.
The TPS731xx uses an advanced BiCMOS process
to yield high precision while delivering very low
dropout voltages and low ground pin current. Current
consumption, when not enabled, is under 1µA and
ideal for portable applications. The extremely low
output noise (30µV_RMS with 0.1µF C_NR) is ideal for
powering VCOs. These devices are protected by
thermal shutdown and foldback current limit.
DBV PACKAGE
SOT23
(TOP VIEW)
IN
1
5
OUT
GND
2
EN
3
4
NR/FB
Optional
V_IN
Optional
IN
OUT
TPS731xx
EN GND NR
V_OUT
Optional
Typical Application Circuit for Fixed-Voltage Versions
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2004, Texas Instruments Incorporated