English
Language : 

TPS71501 Datasheet, PDF (1/11 Pages) Texas Instruments – 50 mA, 24 V, 3.2U Supply Current Low-Dropout Linear Regulator in SC70 Package
www.ti.com
Actual Size
(2,15 mm x 2,3 mm)
TPS71501
TPS71525, TPS71530
TPS71533, TPS71550
SLVS338I – MAY 2001 – REVISED JANUARY 2005
50 mA, 24 V, 3.2µA Supply Current
Low-Dropout Linear Regulator in SC70 Package
FEATURES
• 24-V Maximum Input Voltage
• Low 3.2-µA Quiescent Current at 50 mA
• Stable With Any Capacitor (≥ 0.47 µF)
• 50-mA Low-Dropout Regulator
• Available in 2.5 V, 3.0 V, 3.3 V, 5.0 V, and
Adjustable (1.2 V to 15 V)
• Minimum/Maximum Specified Current Limit
• 5-Pin SC70/SOT-323 (DCK) Package
• -40°C to 125°C Specified Junction
Temperature Range
APPLICATIONS
• Ultra Low Power Microcontrollers
• Cellular/Cordless Handsets
• Portable/Battery-Powered Equipment
DESCRIPTION
The TPS715xx low-dropout (LDO) voltage regulators
offer the benefits of high input voltage, low-dropout
voltage, low-power operation, and miniaturized pack-
aging. The devices, which operate over an input
range of 2.5 V to 24 V, are stable with any capacitor
(≥ 0.47 µF). The low dropout voltage and low
quiescent current allow operations at extremely low
power levels. Therefore, the devices are ideal for
powering battery management ICs. Specifically, since
the devices are enabled as soon as the applied
voltage reaches the minimum input voltage, the
output is quickly available to power continuously
operating battery charging ICs.
The usual PNP pass transistor has been replaced by
a PMOS pass element. Because the PMOS pass
element behaves as a low-value resistor, the low
dropout voltage, typically 415 mV at 50 mA of load
current, is directly proportional to the load current.
The low quiescent current (3.2 µA typically) is stable
over the entire range of output load current (0 mA to
50 mA).
DCK PACKAGE
(TOP VIEW)
FB/NC 1 5 OUT
GND
2
NC 3 4 IN
TPS715xx
IN
OUT
GND
Li+
MSP430
0.47µF
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2001–2005, Texas Instruments Incorporated