TPS62230_1 Datasheet, PDF (1/31 Pages) Texas Instruments – 2 MHz / 3 MHz Ultra Small Step Down Converter in 1x1.5 SON Package

www.ti.com
TPS62230, TPS62231, TPS62232, TPS62233
TPS62234, TPS62235, TPS62236, TPS62237
TPS62238, TPS62239, TPS622310, TPS622311
SLVS941B – APRIL 2009 – REVISED DECEMBER 2009
2 MHz / 3 MHz Ultra Small Step Down Converter in 1x1.5 SON Package
Check for Samples: TPS62230, TPS62231, TPS62232, TPS62233,
TPS62234, TPS62235, TPS62236, TPS62237, TPS62238, TPS62239, TPS622310, TPS622311
FEATURES
1
• 2 MHz / 3 MHz Switch Frequency
• Up to 94% Efficiency
• Output Peak Current up to 500mA
• Excellent AC and Transient Load Regulation
• High PSRR (up to 90dB)
• Small External Output Filter Components 1μH/
4.7μF
• V_IN range from 2.05V to 6V
• Optimized Power Save Mode For Low Output
Ripple Voltage
• Forced PWM Mode Operation
• Typ. 22 μA Quiescent Current
• 100% Duty Cycle for Lowest Dropout
• Small 1 × 1.5 × 0.6mm³ SON Package
• 12 mm² Minimum Solution Size
• Supports 0.6 mm Maximum Solution Height
• Soft Start with typ. 100μs Start Up Time
APPLICATIONS
• LDO Replacement
• Portable Audio, Portable Media
• Cell Phones
• Low Power Wireless
• Low Power DSP Core Supply
• Digital Cameras
V_IN
2.05 V - 6 V
C_IN
2.2 mF
TPS62231
VIN
EN
MODE
SW
FB
GND
L
1/2.2 mH
C_OUT
4.7 mF
V_OUT
1.8 V
DESCRIPTION
The TPS6223X device family is a high frequency
synchronous step down DC-DC converter optimized
for battery powered portable applications. It supports
up to 500mA output current and allows the use of tiny
and low cost chip inductors and capacitors.
With a wide input voltage range of 2.05V to 6V the
device supports applications powered by Li-Ion
batteries with extended voltage range. The minimum
input voltage of 2.05V allows as well the operation
from Li-primary or two alkaline batteries. Different
fixed output voltage versions are available from 1.2V
to 2.5V.
The TPS6223X series features switch frequency up
to 3.8MHz. At medium to heavy loads, the converter
operates in PWM mode and automatically enters
Power Save Mode operation at light load currents to
maintain high efficiency over the entire load current
range.
Because of its excellent PSRR and AC load
regulation performance, the device is also suitable to
replace linear regulators to obtain better power
conversion efficiency.
The Power Save Mode in TPS6223X reduces the
quiescent current consumption down to 22μA during
light load operation. It is optimized to achieve very
low output voltage ripple even with small external
component and features excellent ac load regulation.
For very noise sensitive applications, the device can
be forced to PWM Mode operation over the entire
load range by pulling the MODE pin high. In the
shutdown mode, the current consumption is reduced
to less than 1μA. The TPS6223X is available in a 1 ×
1.5mm² 6 pin SON package.
L1
V
IN
Total area
12mm²
GND
C2
V
OUT
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated