TPS62050_15 Datasheet, PDF (1/30 Pages) Texas Instruments – TPS6205x 800-mA Synchronous Step-Down Converter

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS62050, TPS62051, TPS62052, TPS62054, TPS62056
SLVS432F – SEPTEMBER 2002 – REVISED JUNE 2015
TPS6205x 800-mA Synchronous Step-Down Converter
1 Features
•1 High-Efficiency Synchronous Step-Down
Converter With up to 95% Efficiency
• 12-µA Quiescent Current (Typical)
• 2.7-V to 10-V Operating Input Voltage Range
• Adjustable Output Voltage Range: 0.7 V to 6 V
• Fixed Output Voltage Options Available With
1.5 V, 1.8 V, and 3.3 V
• Synchronizable to External Clock: Up to 1.2 MHz
• High-Efficiency Over a Wide Load Current Range
in Power-Save Mode
• 100% Maximum Duty Cycle for Lowest Dropout
• Low-Noise Operation in Forced Fixed-
Frequency PWM Operation Mode
• Internal Softstart
• Overtemperature and Overcurrent Protected
• Available in 10-Pin Micro-Small Outline
Package MSOP
2 Applications
• Cellular Phones
• Organizers, PDAs, and Handheld PCs
• Low-Power DSP Supplies
• Digital Cameras and Hard Disks
3 Description
The TPS6205x devices are a family of high-efficiency
synchronous step-down DC-DC converters that are
ideally suited for systems powered from a 1- or 2-cell
Li-Ion battery or from a 3- to 5-cell NiCd, NiMH, or
alkaline battery.
The TPS6205x devices are synchronous pulse width
modulation (PWM) converters with integrated N- and
P-channel power MOSFET switches. Synchronous
rectification increases efficiency and reduces external
component count. To achieve highest efficiency over
a wide load current range, the converter enters a
power-saving pulse frequency modulation (PFM)
mode at light load currents. Operating frequency is
typically 850 kHz, allowing the use of small inductor
and capacitor values. The device can be
synchronized to an external clock signal in the range
of 600 kHz to 1.2 MHz. For low noise operation, the
converter can be programmed into forced-fixed
frequency in PWM mode. In shutdown mode, the
current consumption is reduced to less than 2 µA.
The TPS6205x devices are available in the 10-pin
(DGS) micro-small outline package (MSOP) and
operates over a free air temperature range of –40°C
to 85°C.
Device Information⁽¹⁾
PART NUMBER PACKAGE
BODY SIZE (NOM)
TPS62050
TPS62051
TPS62052
VSSOP (10)
3.00 mm × 3.00 mm
TPS62054
TPS62056
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Typical Application Schematic
V_I = 3.3 V to 10 V
C_i = 10 µF
1
VIN
9 ^{L1 = 10 µH V}O ^{= 1.5 V / 800 mA}
SW
8
EN
5
FB
TPS62052
6
LBI
4
PG
7
SYNC
GND
3
2
LBO
PGND
10
C_o = 22 µF
Efficiency vs Output Current
100
90
80
70
60
50
40
30
20 ^{VI = 7.2 V,}
V_O = 5 V,
10 _{SYNC = L}
0
0.01 0.1
1
10 100
1k
I_O – Output Current – mA
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.