TPS61070_15 Datasheet, PDF (1/28 Pages) Texas Instruments – TPS6107x 90% Efficient Synchronous Boost Converter With 600-mA Switch

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS61070, TPS61071, TPS61072, TPS61073
SLVS510E – JULY 2006 – REVISED MARCH 2015
TPS6107x 90% Efficient Synchronous Boost Converter With 600-mA Switch
1 Features
•1 90% Efficient Synchronous Boost Converter
– 75-mA Output Current at 3.3 V From 0.9-V
Input
– 150-mA Output Current at 3.3 V From 1.8-V
Input
• Device Quiescent Current: 19 µA (Typ)
• Input Voltage Range: 0.9 V to 5.5 V
• Adjustable Output Voltage Up to 5.5 V
• Power-Save Mode Version Available for
Improved Efficiency at Low Output Power
• Load Disconnect During Shutdown
• Overtemperature Protection
• Small 6-Pin Thin SOT23 Package
2 Applications
• All One-Cell, Two-Cell, and Three-Cell Alkaline,
NiCd or NiMH or Single-Cell Li
Battery-Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LED Lighting
3 Description
The TPS6107x devices provide a power supply
solution for products powered by either a one-cell,
two-cell, or three-cell alkaline, NiCd or NiMH, or one-
cell Li-ion or Li-polymer battery. Output currents can
go as high as 75 mA while using a single-cell
alkaline, and discharge it down to 0.9 V. It can also
be used for generating 5 V at 200 mA from a 3.3-V
rail or a Li-ion battery. The boost converter is based
on a fixed frequency, pulse-width-modulation (PWM)
controller using a synchronous rectifier to obtain
maximum efficiency. At low load currents the
TPS61070 and TPS61073 enter the power-save
mode to maintain a high efficiency over a wide load
current range. The power-save mode is disabled in
the TPS61071 and TPS61072, forcing the converters
to operate at a fixed switching frequency. The
maximum peak current in the boost switch is typically
limited to a value of 600 mA.
The TPS6107x output voltage is programmed by an
external resistor divider. The converter can be
disabled to minimize battery drain. During shutdown,
the load is completely disconnected from the battery.
The device is packaged in a 6-pin thin SOT23
package (DDC).
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS61070
TPS61071
TPS61072
SOT (6)
2.90 mm x 1.60 mm
TPS61073
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
4 Typical Application Circuit
L1
4.7 µH
SW ^VOUT
VBAT
FB
V_O
R1
C2 _{3.3 V Up To}
10 µF _{100 mA}
0.9-V To V_O
C1
EN
R2
10 µF
GND
TPS61070
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.