TPS54627_15 Datasheet, PDF (1/24 Pages) Texas Instruments – 4.5V to 18V Input, 6-A Synchronous Step-Down Converter

www.ti.com
TPS54627
SLVSBW6A – APRIL 2013 – REVISED SEPTEMBER 2013
4.5V to 18V Input, 6-A Synchronous Step-Down Converter
Check for Samples: TPS54627
FEATURES
1
•23 D-CAP2™ Mode Enables Fast Transient
Response
• Low Output Ripple and Allows Ceramic Output
Capacitor
• Wide V_IN Input Voltage Range: 4.5 V to 18 V
• Output Voltage Range: 0.76 V to 5.5 V
• Highly Efficient Integrated FETs Optimized
for Lower Duty Cycle Applications
– 36 mΩ (High Side) and 28 mΩ (Low Side)
• High Efficiency, less than 10 μA at shutdown
• High Initial Bandgap Reference Accuracy
• Adjustable Soft Start
• Pre-Biased Soft Start
• 650-kHz Switching Frequency (f_SW)
• Cycle By Cycle Over Current Limit
DESCRIPTION
The TPS54627 is an adaptive on-time D-CAP2™
mode synchronous buck converter. The TPS54627
enables system designers to complete the suite of
various end-equipment power bus regulators with a
cost effective, low component count, low standby
current solution. The main control loop for the
TPS54627 uses the D-CAP2™ mode control that
provides a fast transient response with no external
compensation components. The TPS54627 also has
a proprietary circuit that enables the device to adopt
to both low equivalent series resistance (ESR) output
capacitors, such as POSCAP or SP-CAP, and ultra-
low ESR ceramic capacitors. The device operates
from 4.5-V to 18-V VIN input. The output voltage can
be programmed between 0.76 V and 5.5 V. The
device also features an adjustable soft start time. The
TPS54627 is available in the 8-pin DDA package,
and designed to operate from –40°C to 85°C.
APPLICATIONS
• Wide Range of Applications for Low Voltage
System
– Digital TV Power Supply
– High Definition Blu-ray Disc™ Players
– Networking Home Terminal
– Digital Set Top Box (STB)
TPS54627
Vout(50mV/div)
Iout(2A/div)
100us/div
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
D-CAP2 is a trademark of Texas Instruments.
2
Blu-ray Disc is a trademark of Blu-ray Disc Association.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated