TPS54620 Datasheet, PDF (1/39 Pages) Texas Instruments – 17V Input, 6A Output, Synchronous Step Down Switcher With Integrated FET in 3.5mm x 3.5mm Package(SWIFT™)

TPS54620
www.ti.com ........................................................................................................................................................................................................ SLVS949 – MAY 2009
17V Input, 6A Output, Synchronous Step Down Switcher
With Integrated FET in 3.5mm x 3.5mm Package(SWIFT™)
FEATURES
1
•2 Integrated 26mΩ / 19mΩ MOSFETs
• Split Power Rail: 1.6V to 17V on PVIN
• 200kHz to 1.6MHz Switching Frequency
• Synchronizes to External Clock
• 0.8V ±1% Voltage Reference Over Temperature
• Low 2uA Shutdown Quiscent Current
• Monotonic Start-Up into Prebiased Outputs
• –40°C to 150°C Operating Junction
Temperature Range
• Adjustable Slow Start/Power Sequencing
• Power Good Output Monitor for Undervoltage
& Overvoltage
• Adjustable Input Undervoltage Lockout
• Supported by SwitcherPro™ Software Tool
• For SWIFT™ Documentation and
SwitcherPro™, visit http://www.ti.com/swift
APPLICATIONS
• High Density Distributed Power Systems
• High Peformance Point of Load Regulation
• Broadband, Networking and Optical
Communications Infrastructure
DESCRIPTION
The TPS54620 in thermally enhanced 3.5mm x 3.5mm QFN package is a full featured 17V, 6A synchronous step
down converter which is optimized for small designs through high efficiency and integrating the high-side and
low-side MOSFETs. Further space savings are achieved through current mode control, which reduces
component count, and by selecting a high switching frequency, reducing the inductor's footprint.
The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone
power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and
the open drain power good pins.
Cycle by cycle current limiting on the high-side fet protects the device in overload situations and is enhanced by
a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit
which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part
when die temperature rises too high.
WHITE SPACE
VIN
Cin
Css Rrt C2
SIMPLIFIED SCHEMATIC
PVIN
VIN
TPS54620
BOOT
Cboot
EN
PH
PWRGD
Lo
Co
VSENSE
SS/TR
RT/CLK
COMP GND
R3
PowerPAD
C1
VOUT
R1
R2
100
95
90
85
80
75
70
65
60
55
50
0
8V
12 V
17 V
VOUT = 3.3 V
Fsw = 480 kHz
1
2
3
4
5
6
Load Current - A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SWIFT, PowerPAD are trademarks of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated