TPS5450_15 Datasheet, PDF (1/30 Pages) Texas Instruments – TPS5450 5-A, Wide Input Range, Step-Down Converter

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPS5450
SLVS757D – MARCH 2007 – REVISED DECEMBER 2014
TPS5450 5-A, Wide Input Range, Step-Down Converter
1 Features
•1 Wide Input Voltage Range: 5.5 V to 36 V
• Up to 5-A Continuous (6-A Peak) Output Current
• High Efficiency Greater Than 90% Enabled by
110-mΩ Integrated MOSFET Switch
• Wide Output Voltage Range: Adjustable Down to
1.22 V With 1.5% Initial Accuracy
• Internal Compensation Minimizes External Part
Count
• Fixed 500-kHz Switching Frequency for Small
Filter Size
• 18-μA Shutdown Supply Current
• Improved Line Regulation and Transient
Response by Input Voltage Feed Forward
• System Protected by Overcurrent Limiting,
Overvoltage Protection and Thermal Shutdown
• –40°C to 125°C Operating Junction Temperature
Range
• Available in Small Thermally Enhanced 8-Pin
SOIC PowerPAD™ Package
2 Applications
• High Density Point-of-Load Regulators
• LCD Displays, Plasma Displays
• Battery Chargers
• 12-V and 24-V Distributed Power Systems
3 Description
The TPS5450 is a high-output-current PWM
converter that integrates a low-resistance, high-side
N-channel MOSFET. Included on the substrate with
the listed features are a high-performance voltage
error amplifier that provides tight voltage regulation
accuracy under transient conditions; an undervoltage-
lockout circuit to prevent start-up until the input
voltage reaches 5.5 V; an internally set slow-start
circuit to limit inrush currents; and a voltage feed-
forward circuit to improve the transient response.
Using the ENA pin, shutdown supply current is
reduced to 18 μA typically. Other features include an
active-high enable, overcurrent limiting, overvoltage
protection and thermal shutdown. To reduce design
complexity and external component count, the
TPS5450 feedback loop is internally compensated.
The TPS5450 device is available in a thermally-
enhanced, 8-pin SOIC PowerPAD package. TI
provides evaluation modules and software tool to aid
in achieving high-performance power supply designs
to meet aggressive equipment development cycles.
Device Information⁽¹⁾
PART NUMBER PACKAGE
BODY SIZE (NOM)
TPS5450
HSOP (8)
4.89 mm × 3.90 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
Efficiency vs Output Current
VIN
VIN
PH
NC BOOT
NC
ENA VSENSE
GND
VOUT
100
95
90
85
80
75
70
65
60
55
50
0
V_I = 12 V,
V_O = 5 V,
f_s = 500 kHz,
T_A = 25°C
1
2
3
4
5
6
I_O - Output Current - A
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.