TPS54339E Datasheet, PDF (1/21 Pages) Texas Instruments – 4.5V to 23V Input, 3-A Synchronous Step-Down SWIFT Converter with Eco-Mode

TPS54339E
www.ti.com
SLVSBM0A – DECEMBER 2012 – REVISED DECEMBER 2012
4.5V to 23V Input, 3-A Synchronous Step-Down SWIFT™ Converter with Eco-Mode™
Check for Samples: TPS54339E
FEATURES
1
•23 D-CAP2™ Mode Enables Fast Transient
Response
• Low Output Ripple and Allows Ceramic Output
Capacitor
• Wide V_IN Input Voltage Range: 4.5 V to 23 V
• Output Voltage Range: 0.76 V to 7.0 V
• Highly Efficient Integrated FETs Optimized
for Lower Duty Cycle Applications
– 140 mΩ (High Side) and 70 mΩ (Low Side)
• High Efficiency, less than 10 μA at shutdown
• High Initial Bandgap Reference Accuracy
• Adjustable Soft Start
• Pre-Biased Soft Start
• 600-kHz Switching Frequency (f_SW)
• Cycle By Cycle Over Current Limit
• Auto-Skip Eco-mode™ for High Efficiency at
Light Load
APPLICATIONS
• Wide Range of Applications for Low Voltage
System
– Digital TV Power Supply
– High Definition Blu-ray Disc™ Players
– Networking Home Terminal
– Digital Set Top Box (STB)
DESCRIPTION
The TPS54339E is an adaptive on-time D-CAP2™
mode synchronous buck converter. The TPS54339E
enables system designers to complete the suite of
various end-equipment power bus regulators with a
cost effective, low component count, low standby
current solution. The main control loop for the
TPS54339E uses the D-CAP2™ mode control that
provides a fast transient response with no external
compensation components. The adaptive on-time
control supports seamless transition between PWM
mode at higher load conditions and Eco-mode™
operation at light loads. Eco-mode™ allows the
TPS54339E to maintain high efficiency during lighter
load conditions. The TPS54339E also has a
proprietary circuit that enables the device to adopt to
both low equivalent series resistance (ESR) output
capacitors, such as POSCAP or SP-CAP, and ultra-
low ESR ceramic capacitors. The device operates
from 4.5-V to 18-V VIN input. The output voltage can
be programmed between 0.76 V and 7 V. The device
also features an adjustable soft start time. The
TPS54339E is available in the 8-pin DDA package,
and designed to operate from –40°C to 85°C.
VIN
Vout (50 mV/div)
VOUT
TPS54339EDDA
1
VBST
8
SS
2 _VIN
7
EN
EN
3
6
SW VREG5
4 _GND
5
VFB
PwPd
9
VOUT
Iout (2 A/div)
100 us/div
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
D-CAP2, Eco-mode are trademarks of Texas Instruments.
2
Blu-ray Disc is a trademark of Blu-ray Disc Association.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated