|
TPS54122-Q1_15 Datasheet, PDF (1/40 Pages) Texas Instruments – TPS54122-Q1 Dual-Output, 3-A, QuietSupply™ with Integrated DC-DC Converter and Low-Noise LDO | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
TPS54122-Q1
SBVS253A â JANUARY 2015 â REVISED MAY 2015
TPS54122-Q1 Dual-Output, 3-A, QuietSupplyâ¢
with Integrated DC-DC Converter and Low-Noise LDO
1 Features
â¢1 AEC-Q100 Qualified with the Following Results:
â Device Temperature Grade 1: â40°C to 125°C
Ambient Operating Temperature Range
â Device HBM ESD Classification Level H2
â Device CDM ESD Classification Level C4B
⢠Input Voltage Range:
â VIN: 2.95 V to 6.0 V
â LDOIN: VOUT + VDO to 5.5 V
â BIAS: 2.375 V to 5.5 V
⢠Provides Two Configurable Supply Rails
⢠Independent Enable, Power Good, and Soft-Start
⢠3-A, High-Efficiency, Synchronous, Step-Down
Switcher:
â Output Voltage Adjustable Down to 0.8 V
â Sync to External Clock: 300 kHz to 2 MHz
â 1% Reference Accuracy
⢠3-A, Low-Noise LDO:
â Output Noise: 17 µVRMS at 10 Hz to 1 MHz
with DC-DC Running
â Output Voltage Range: 0.8 V to 3.6 V
â Ultralow Dropout: 100 mV (typ) at 3 A
â 1% Output Accuracy
â Excellent Load and Line Transient Response
⢠Small Package: 5.5-mm à 3.5-mm VQFN-24
2 Applications
⢠Power Optimization in Automotive ECU Power
⢠Automotive Infotainment Systems
⢠Automotive ADAS Systems
⢠Powering Sensitive Clocking-Distribution Circuits
⢠Powering RF Components:
VCOs, Receivers, and ADCs
3 Description
The TPS54122-Q1 combines the efficiency of a step-
down switching (dc-dc) converter with a high power-
supply rejection (PSR), low-noise, low-dropout
regulator (LDO) to provide an ultralow-noise power
supply that delivers QuietSupply rails to noise-
sensitive applications.
The TPS54122-Q1 is ideally suited for systems with
5-V power busses and can support 3-A continuous
output current on both the dc-dc or LDO output. The
LDO output voltage can be set from 0.8 V to 3.6 V
and the dc-dc can be adjusted from 0.83 V to 5.0 V
using external resistors. The TPS54122-Q1 can be
used in a wide range of low-noise applications
because the dc-dc converter and LDO are completely
configurable. In addition, the TPS54122-Q1 includes
features such as soft-start, switching frequency
synchronization, and a power-good signal.
The TPS54122-Q1 can also be configured as a dual-
supply rail device, supplying a total of 3 A.
The TPS54122-Q1 is available in a space-saving,
3.5-mm à 5.5-mm VQFN package, and is specified to
operate over a â40°C to 125°C ambient temperature
range. The TPS54122-Q1 is suited for automotive
applications because the device is qualified for AEC-
Q100 grade 1.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS54122-Q1
VQFN (24)
5.50 mm à 3.50 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
12 V
3.3 V
DC-DC
TPS54122-Q1
Battery
VIN (DC-DC)
DC-DC Output 1.2 V VCORE
Microprocessor
LDOIN
LDO Output 1.8 V VCCIO
3.3 V
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |