TPS53127_1 Datasheet, PDF (1/29 Pages) Texas Instruments – DUAL SYNCHRONOUS STEP-DOWN CONTROLLER FOR LOW VOLTAGE POWER RAILS

TPS53127
www.ti.com
DUAL SYNCHRONOUS STEP-DOWN CONTROLLER
FOR LOW VOLTAGE POWER RAILS
Check for Samples: TPS53127
SLVSA93 – MARCH 2010
FEATURES
1
•2 D-CAP2™ Mode Control
– Fast Transient Response
– No External Parts Required for Loop
Compensation
– Compatible With Ceramic Output
Capacitors
• High Initial Reference Accuracy (±1%)
• Low Output Ripple
• Wide Input Voltage Range: 4.5 V to 24 V
• Output Voltage Range: 0.76 V to 5.5 V
• Low-Side R_DS(ON) Loss-Less Current Sensing
• Adaptive Gate Drivers with Integrated Boost
Diode
• Adjustable Soft Start
• Non-Sinking Pre-Biased Soft Start
• 700-kHz Switching Frequency
• Cycle-by-Cycle Over-Current Limiting Control
• 30-mV to 300-mV OCP Threshold Voltage
• Thermally Compensated OCP by 4000 ppm/°C
at I_TRIP
APPLICATIONS
• Point-of-Load Regulation in Low Power
Systems for Wide Range of Applications
– Digital TV Power Supply
– Networking Home Terminal
– Digital Set-Top Box (STB)
– DVD Player/Recorder
– Gaming Consoles
DESCRIPTION
The TPS53127 is a dual, adaptive on-time D-CAP2™ mode synchronous buck controller. The part enables
system designers to cost effectively complete the suite of various end equipment's power bus regulators with a
low external component count and low standby consumption. The main control loop for the TPS53127 uses the
D-CAP2™ Mode topology which provides a very fast transient response with no external component.
The TPS53127 also has a proprietary circuit that enables the device to adapt not only low equivalent series
resistance (ESR) output capacitors such as POSCAP/SP-CAP, but also ceramic capacitor. The part provides a
convenient and efficient operation with conversion voltages from 4.5 V to 24 V and output voltage from 0.76 V to
5.5 V.
The TPS53127 is available in the 24 pin RGE/PW package, and is specified from –40°C to 85°C ambient
temperature range.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
D-CAP2 is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated