TPS43350-Q1_15 Datasheet, PDF (1/33 Pages) Texas Instruments – LOW IQ, DUAL SYNCHRONOUS BUCK CONTROLLER

www.ti.com
TPS43350-Q1
TPS43351-Q1
SLVSAR7D – JUNE 2011 – REVISED APRIL 2013
LOW I_Q, DUAL SYNCHRONOUS BUCK CONTROLLER
Check for Samples: TPS43350-Q1, TPS43351-Q1
FEATURES
1
•2 Qualified for Automotive Applications
• AEC-Q100 Test Guidance With the Following
Results:
– Device Temperature Grade 1: –40°C to
125°C Ambient Operating Temperature
– Device HBM ESD Classification Level H2
– Device HBM CDM Classification Level C2
• Two Synchronous Buck Controllers
• Input Range up to 40 V, (Transients up to 60 V)
• Low-Power Mode I_Q: 30 µA (One Buck On),
35 µA (Two Bucks On)
• Low Shutdown Current I_sh < 4 µA
• Buck Output Range 0.9 V to 11 V
• Programmable Frequency and External
Synchronization Range 150 kHz to 600 kHz
• Separate Enable Inputs (ENA, ENB)
• Frequency Spread Spectrum (TPS43351-Q1)
• Selectable Forced Continuous Mode or
Automatic Low-Power Mode at Light Loads
• Sense Resistor or Inductor DCR Sensing
• Out-of-Phase Switching Between Buck
Channels
• Peak Gate Drive Current 1.5 A
• Thermally Enhanced, 38-Pin HTSSOP (DAP)
PowerPAD™ Package
APPLICATIONS
• Automotive Infotainment, Navigation, and
Instrument Cluster Systems
• Industrial or Automotive Multi-Rail DC Power
Distribution Systems and Electronic Control
Units
DESCRIPTION
The TPS43350-Q1 and TPS43351-Q1 include two current-mode synchronous buck controllers designed for the
harsh environment in automotive applications. The devices are ideal for use in a multi-rail system with low
quiescent requirements, as they automatically operate in low-power mode (consuming only 30 µA) at light loads.
The devices offer protection features such as thermal, soft-start, and overcurrent protection. During short-circuit
conditions of the regulator output, activation of the current-foldback feature can limit the current through the
MOSFETs for control of power dissipation. The two independent soft-start inputs allow ramp-up of the output
voltage independently during start-up.
The programmable range of the switching frequency is from 150 kHz to 600 kHz, as is the frequency of an
external clock to which the devices can synchronize. Additionally, the TPS43351-Q1 offers frequency-hopping
spread-spectrum operation.
spacer
V_BAT
SYNC
ENA
ENB
SSA
SSB
DLYAB
Reverse
Battery
MOSFET
Control
Internal
V_REG
RCOSC
External
Sync
BuckA
Buck
Enable
SoftStart
BuckB
V_BuckA
V_BuckB
Figure 1. Typical Application Diagram
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2013, Texas Instruments Incorporated