TPS2811 Datasheet, PDF (1/31 Pages) Texas Instruments – DUAL HIGH-SPEED MOSFET DRIVERS

TPS2811, TPS2812, TPS2813, TPS2814, TPS2815
DUAL HIGH-SPEED MOSFET DRIVERS
SLVS132D – NOVEMBER 1995 – REVISED NOVEMBER 1997
D Industry-Standard Driver Replacement
D 25-ns Max Rise/Fall Times and 40-ns Max
Propagation Delay – 1-nF Load, V_CC = 14 V
D 2-A Peak Output Current, V_CC = 14 V
D 5-µA Supply Current — Input High or Low
D 4-V to 14-V Supply-Voltage Range; Internal
Regulator Extends Range to 40 V (TPS2811,
TPS2812, TPS2813)
D – 40°C to 125°C Ambient-Temperature
Operating Range
TPS2811, TPS2812, TPS2813 . . . D, P, AND PW
PACKAGES
(TOP VIEW)
REG_IN 1
1IN 2
GND 3
2IN 4
8 REG_OUT
7 1OUT
6 V_CC
5 2OUT
TPS2814 . . . D, P, AND PW PACKAGES
(TOP VIEW)
description
1IN1 1
1IN2 2
8 GND
7 1OUT
The TPS28xx series of dual high-speed MOSFET
drivers are capable of delivering peak currents of
2IN1 3
2IN2 4
6 V_CC
5 2OUT
2 A into highly capacitive loads. This performance
is achieved with a design that inherently
minimizes shoot-through current and consumes
TPS2815 . . . D, P, AND PW PACKAGES
(TOP VIEW)
an order of magnitude less supply current than
competitive products.
1IN1 1
8 GND
The TPS2811, TPS2812, and TPS2813 drivers
include a regulator to allow operation with supply
inputs between 14 V and 40 V. The regulator
1IN2 2
2IN1 3
2IN2 4
7 1OUT
6 V_CC
5 2OUT
output can power other circuitry, provided power
dissipation does not exceed package limitations. When the regulator is not required, REG_IN and REG_OUT
can be left disconnected or both can be connected to V_CC or GND.
The TPS2814 and the TPS2815 have 2-input gates that give the user greater flexibility in controlling the
MOSFET. The TPS2814 has AND input gates with one inverting input. The TPS2815 has dual-input NAND
gates.
TPS28xx series drivers, available in 8-pin PDIP, SOIC, and TSSOP packages and as unmounted ICs, operate
over a ambient temperature range of –40°C to 125°C.
AVAILABLE OPTIONS
INTERNAL
TA _REGULATOR
LOGIC FUNCTION
PACKAGED DEVICES
SMALL
OUTLINE
(D)
PLASTIC
DIP
(P)
TSSOP (PW)
CHIP
FORM
(Y)
– 40°C
to
125°C
Dual inverting drivers
Yes
Dual noninverting drivers
One inverting and one noninverting driver
TPS2811D TPS2811P TPS2811PWLE TPS2811Y
TPS2812D TPS2812P TPS2812PWLE TPS2812Y
TPS2813D TPS2813P TPS2813PWLE TPS2813Y
Dual 2-input AND drivers, one inverting input on TPS2814D TPS2814P TPS2814PWLE TPS2814Y
No
each driver
Dual 2-input NAND drivers
TPS2815D TPS2815P TPS2815PWLE TPS2815Y
The D package is available taped and reeled. Add R suffix to device type (e.g., TPS2811DR). The PW package is only available left-end
taped and reeled and is indicated by the LE suffix on the device type (e.g., TPS2811PWLE).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1997, Texas Instruments Incorporated
1