TPS2544RTER Datasheet, PDF (1/33 Pages) Texas Instruments – USB Charging Port Controller and Power Switch

TPS2544
www.ti.com
SLVSBU8A – FEBRUARY 2013 – REVISED FEBRUARY 2013
USB Charging Port Controller and Power Switch
Check for Samples: TPS2544
FEATURES
1
• D+/D– CDP/DCP Modes per USB Battery
Charging Specification 1.2
• D+/D– Shorted Mode per Chinese
Telecommunication Industry Standard YD/T
1591-2009
• Support non-BC1.2 charging modes by
automatic selection
– D+/D– Divider Modes 2.0V/2.7V and 2.7/2.0V
– D+/D- 1.2V Mode
• Supports Sleep-Mode Charging and
Mouse/Keyboard Wake Up
• Automatic SDP/CDP Switching for devices that
do not connect to CDP ports
• Compatible with USB 2.0 and 3.0 Power Switch
requirements
• Integrated 73-mΩ (typ) High-Side MOSFET
• Adjustable Current-Limit up to 3.0 A (typ)
• Operating Range: 4.5V to 5.5V
• Max device current
– 2µA when device disabled
– 270µA when device enabled
• Drop-In and BOM Compatible with TPS2543
and TPS2546
• Available in 16-Pin QFN (3x3) Package
• 8KV ESD rating on DM/DP pins
• UL Listed and CB File No. E169910
APPLICATIONS
• USB Ports (Host and Hubs)
• Notebook and Desktop PCs
• Universal Wall Charging Adapters
DESCRIPTION
The TPS2544 is a USB charging port controller and
power switch with an integrated USB 2.0 high-speed
data line (D+/D–) switch. TPS2544 provides the
electrical signatures on D+/D– to support charging
schemes listed under device feature section. TI tests
charging of popular mobile phones, tablets and media
devices with the TPS2544 to ensure compatibility with
both BC1.2 compliant and non-compliant devices. In
addition to charging popular devices, TPS2544 also
supports system wake up (from S3) with a
mouse/keyboard; both low speed and full speed are
supported.
The TPS2544 73-mΩ power-distribution switch is
intended for applications where heavy capacitive
loads and short-circuits are likely to be encountered.
Two programmable current thresholds provide
flexibility for setting current limits.
TPS2544 RTE PACKAGE AND TYPICAL APPLICATION DIAGRAM
16 15 14 13
IN 1
DM_OUT 2
DP_OUT ³
ILIM_SEL ⁴
Thermal Pad
12 OUT
11 DM_IN
10 DP_IN
9 NC
To Portable Device à
Power Bus ^{4.5V – 5.5V}
0.1 uF
IN
RFAULT
(10 kW)
OUT
ILIM_LO
ILIM_HI
CUSB
VBUS
D-
D+
GND
TPS2544
RILIM_HI
RILIM_LO
Fault Signal
FAULT
GND
ILIM Select
Power Switch EN
Mode Select I/O
ILIM_SEL
EN
CTL1
CTL2
CTL3
DM_IN
DP_IN
DM_OUT
DP_OUT
USB
Connector
To Host Controller à
5678
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated