TPS2206 Datasheet, PDF (1/28 Pages) Texas Instruments – DUAL-SLOT PC CARD POWER-INTERFACE SWITCH WITH RESET FOR SERIAL PCMCIA CONTROLLER

TPS2206
DUAL-SLOT PC CARD POWER-INTERFACE SWITCH
WITH RESET FOR SERIAL PCMCIA CONTROLLER
SLVS138B – MAY 1996 – REVISED JUNE 1998
D Fully Integrated V_CC and V_pp Switching for
Dual-Slot PC Card™ Interface
D P²C™ 3-Lead Serial Interface Compatible With
CardBus™ Controllers
D 3.3 V Low-Voltage Mode
D Meets PC Card Standards
D RESET for System Initialization of PC Cards
D 12-V Supply Can Be Disabled Except During
12-V Flash Programming
D Short Circuit and Thermal Protection
D 30-Pin SSOP (DB) and 32-Pin TSSOP (DAP)
D Compatible With 3.3-V, 5-V and 12-V PC Cards
D Low r_DS(on) (140-mΩ 5-V V_CC Switch; 110-mΩ
3.3-V V_CC Switch)
D Break-Before-Make Switching
5V
5V
DATA
CLOCK
LATCH
RESET
12V
AVPP
AVCC
AVCC
AVCC
GND
NC
RESET
3.3V
DB OR DF PACKAGE
(TOP VIEW)
1
30
2
29
3
28
4
27
5
26
6
25
7
24
8
23
9
22
10
21
11
20
12
19
13
18
14
17
15
16
5V
NC
NC
NC
NC
NC
12V
BVPP
BVCC
BVCC
BVCC
NC
OC
3.3V
3.3V
description
The TPS2206 PC Card power-interface switch
provides an integrated power-management solution
for two PC Cards. All of the discrete power
MOSFETs, a logic section, current limiting, and
thermal protection for PC Card control are
combined on a single integrated circuit (IC), using
the Texas Instruments LinBiCMOS™ process.
The circuit allows the distribution of 3.3-V, 5-V,
and/or 12-V card power by means of the P²C
(PCMCIA Peripheral-Control) Texas Instruments
nonproprietary serial interface. The current-limiting
feature eliminates the need for fuses, which
reduces component count and improves reliability.
The TPS2206 is backward compatible with the
TPS2202 and TPS2202A, except that there is no
V_DD connection. Bias current is derived from
either the 3.3-V input pin or the 5-V input pin. The
TPS2206 also eliminates the APWR_GOOD and
BPWR_GOOD pins of the TPS2202 and
TPS2202A.
5V
5V
NC
DATA
CLOCK
LATCH
RESET
12V
AVPP
AVCC
AVCC
AVCC
GND
RESET
NC
3.3V
DAP PACKAGE
(TOP VIEW)
1
32
2
31
3
30
4
29
5
28
6
27
7
26
8
25
9
24
10
23
11
22
12
21
13
20
14
19
15
18
16
17
NC – No internal connection
5V
NC
NC
NC
NC
NC
NC
12V
BVPP
BVCC
BVCC
BVCC
OC
NC
3.3V
3.3V
The TPS2206 features a 3.3-V low-voltage mode that allows for 3.3-V switching without the need for 5 V. This
facilitates low-power system designs such as sleep mode and pager mode where only 3.3 V is available.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinBiCMOS and P2C are trademarks of Texas Instruments Incorporated.
PC Card and CardBus are trademarks of PCMCIA (Personal Computer Memory Card International Association).
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1998, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1