TPS2060 Datasheet, PDF (1/21 Pages) Texas Instruments – CURRENT-LIMITED, POWER-DISTRIBUTION SWITCHES

www.ti.com
DGN−8
TPS2060
TPS2064
SLVS553A – MARCH 2005 – REVISED JULY 2005
CURRENT-LIMITED, POWER-DISTRIBUTION SWITCHES
FEATURES
• 70-mΩ High-Side MOSFET
• 1.5-A Continuous Current
• Thermal and Short-Circuit Protection
• Accurate Current Limit (1.6 A min, 2.6 A max)
• Operating Range: 2.7 V to 5.5 V
• 0.6-ms Typical Rise Time
• Undervoltage Lockout
• Deglitched Fault Report (OC)
• No OC Glitch During Power Up
• 1-µA Maximum Standby Supply Current
• Bidirectional Switch
• Ambient Temperature Range: 0°C to 70°C
• ESD Protection
• UL Listed - File No. E169910
APPLICATIONS
• Heavy Capacitive Loads
• Short-Circuit Protections
TPS2060
DGN PACKAGE
(TOP VIEW)
TPS2064
DGN PACKAGE
(TOP VIEW)
GND 1
8
OC1
GND 1
8
OC1
IN
2
7
OUT1
IN
2
7
OUT1
EN1 3
6
OUT2
EN1 3
6
OUT2
EN2 4
5
OC2
EN2 4
5
OC2
DESCRIPTION
The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and
short-circuits are likely to be encountered. This device incorporates 70-mΩ N-channel MOSFET power switches
for power-distribution systems that require multiple power switches in a single package. Each switch is controlled
by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch
rise times and fall times to minimize current surges during switching. The charge pump requires no external
components and allows operation from supplies as low as 2.7 V.
When the output load exceeds the current-limit threshold or a short is present, the device limits the output current
to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When
continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction
temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal
shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains
off until valid input voltage is present. This power-distribution switch is designed to set current limit at 2.1 A
typically.
GENERAL SWITCH CATALOG
33 mΩ, single _{TPS201xA 0.2 A − 2 A}
TPS202x 0.2 A − 2 A
TPS203x 0.2 A − 2 A
TPS2014
TPS2015
80 mΩ, single TPS2041B
TPS2051B
TPS2045
TPS2055
TPS2061
TPS2065
600 mA
1A
500 mA
500 mA
250 mA
250 mA
1A
1A
80 mΩ, dual
TPS2042B
TPS2052B
TPS2046
TPS2056
TPS2062
TPS2066
TPS2060
TPS2064
500 mA
500 mA
250 mA
250 mA
1A
1A
1.5 A
1.5 A
260 mΩ
TPS2100/1
IN1 500 mA
IN1
IN2 10 mA
IN2
OUT TPS2102/3/4/5
1.3 Ω
IN1 500 mA
IN2 100 mA
80 mΩ, dual
TPS2080
TPS2081
TPS2082
TPS2090
TPS2091
TPS2092
500 mA
500 mA
500 mA
250 mA
250 mA
250 mA
80 mΩ, triple
TPS2043 500 mA
TPS2053B 500 mA
TPS2047 250 mA
TPS2057 250 mA
TPS2063 1 A
TPS2067 1 A
80 mΩ, quad
TPS2044B 500 mA
TPS2054B 500 mA
TPS2048 250 mA
TPS2058 250 mA
80 mΩ, quad
TPS2085
TPS2086
TPS2087
TPS2095
TPS2096
TPS2097
500 mA
500 mA
500 mA
250 mA
250 mA
250 mA
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005, Texas Instruments Incorporated