|
TPL0102_15 Datasheet, PDF (1/45 Pages) Texas Instruments – TPL0102 Two 256-Taps Digital Potentiometers With Non-Volatile Memory | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPL0102
SLIS134C â MARCH 2011 â REVISED SEPTEMBER 2015
TPL0102 Two 256-Taps Digital Potentiometers With Non-Volatile Memory
1 Features
â¢1 Two Potentiometers with 256-Position Resolution
⢠Non-volatile Memory Stores Wiper Settings
⢠100 kΩ End-to-End Resistance (TPL0102-100)
⢠Fast Power-up Response Time to Wiper Setting:
<100 µs
⢠±0.5 LSB INL, ±0.25 LSB DNL (Voltage-Divider
Mode)
⢠4 ppm/°C Ratiometric Temperature Coefficient
⢠I2C-compatible Serial Interface
⢠2.7 V to 5.5 V Single-Supply Operation
⢠±2.25 V to ±2.75 V Dual-Supply Operation
⢠Operating Temperature Range from â40°C to
85°C
⢠Shutdown Mode
⢠ESD Performance Tested Per JESD 22
â 2000-V Human Body Model (A114-B, Class II)
â 1000-V Charged-Device Model (C101)
2 Applications
⢠Adjustable Gain Amplifiers and Offset Trimming
⢠Adjustable Power Supplies
⢠Precision Calibration of Set Point Thresholds
⢠Sensor Trimming and Calibration
⢠Mechanical Potentiometer Replacement
3 Description
The TPL0102 has two linear-taper digital
potentiometers (DPOTs) with 256 wiper positions.
Each potentiometer can be used as a three-terminal
potentiometer or as a two-terminal rheostat. The
TPL0102-100 has an end-to-end resistance of 100
kâ¦.
The TPL0102 has non-volatile memory (EEPROM)
which can be used to store the wiper position. This is
beneficial because the wiper position is stored even
during power-off and is automatically reinstated after
power-on. The internal registers of the TPL0102 can
be accessed using the I2C interface.
The TPL0102 is available in a 14-pin MicroQFN and
14-pin TSSOP package with a specified temperature
range of â40°C to 85°C.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPL0102
X2QFN (14)
TSSOP (14)
2.00 mm à 2.00 mm
5.00 mm à 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Simplified Schematic
A0 A1 A2
VDD VSS
HA HB
SCL
I2C INTERFACE
VOLATILE
WA
REGISTERS
SDA
NON-VOLATILE
REGISTERS
GND
WB
LA
LB
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |