TPIC2101 Datasheet, PDF (1/18 Pages) Texas Instruments – DC BRUSH MOTOR CONTROLLER

TPIC2101
DC BRUSH MOTOR CONTROLLER
D 0 V to 16 V, 50 mA Max PWM Gate Drive
Output
D Dual Speed Command Input Capability
D Effective Motor Voltage Adjustment
D 100% Duty Cycle Capability
D Low Current (<200 µA) Sleep State
D Built-in Soft Start
D Over/Under Voltage Protection
D Over Current Protection of External
FET/IGBT
SLIS060 – OCTOBER 1995
D or N PACKAGE
(TOP VIEW)
V5P5 ₁
MAN ₂
AUTO ₃
SPEED 4
ROSC 5
COSC 6
INT 7
14 ^CCS
13 ^AREF
12 ^V_bat
11 GD
10 GND
9 ILS
8 ILR
description
The TPIC2101 is a monolithic integrated control circuit designed for direct current (dc) brush motor control that
generates a user-adjustable, fixed-frequency, variable duty cycle, pulse width modulated (PWM) signal
primarily to control rotor speed of a permanent magnet dc motor. The TPIC2101 can also be used to control
power to other loads such as solenoids and incandescent bulbs. This device drives the gate of an external, low
side NMOS power transistor to provide PWM controlled power to a motor or other loads. Inductive current from
motor or solenoid loads during PWM off-time is recirculated through an external diode.
The TPIC2101 accepts a 0% to 100% PWM signal (auto mode) or a 0 V to 2.2 V differential voltage (manual
mode), and internally engages the correct operating mode to accept the input type.
The device operates in a sleep state, a run state, or a fault state. In the sleep state the gate-drive (GD) terminal
is held low and the overall current draw is less than 200 µA. The normal operating mode of the device is in the
run state and is initiated by any speed command. When the device detects an overvoltage or current fault, it
enters the fault state.
The TPIC2101 is offered in a 14-terminal plastic DIP (N) package, and a SOIC (D) package, and is characterized
for operation over the operating free-air temperature range of –40°C to 105°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1995, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443
1