|
TPA711_15 Datasheet, PDF (1/39 Pages) Texas Instruments – 700-MW MONO LOW-VOLTAGE AUDIO POWER AMPLIFIER | |||
|
TPA711
700ÄmW MONO LOWÄVOLTAGE AUDIO POWER AMPLIFIER
SLOS230D â NOVEMBER 1998 â REVISED OCTOBER 2002
D Fully Specified for 3.3-V and 5-V Operation
D BTL to SE Mode Control
D Wide Power Supply Compatibility
D Integrated Depop Circuitry
2.5 V â 5.5 V
D Output Power
â 700 mW at VDD = 5 V, BTL, RL = 8 â¦
â 85 mW at VDD = 5 V, SE, RL = 32 â¦
â 250 mW at VDD = 3.3 V, BTL, RL = 8 â¦
â 37 mW at VDD = 3.3 V, SE, RL = 32 â¦
D Shutdown Control
â IDD = 7 µA at 3.3 V
â IDD = 50 µA at 5 V
description
The TPA711 is a bridge-tied load (BTL) or
D Thermal and Short-Circuit Protection
D Surface-Mount Packaging
â SOIC
â PowerPAD MSOP
D OR DGN PACKAGE
(TOP VIEW)
SHUTDOWN 1
8
VOâ
BYPASS 2
7
GND
SE/BTL 3
6
VDD
IN 4
5
VO+
single-ended (SE) audio power amplifier devel-
oped especially for low-voltage applications where internal speakers and external earphone operation are
required. Operating with a 3.3-V supply, the TPA711 can deliver 250-mW of continuous power into a BTL 8-â¦
load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out
to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL
configuration eliminates the need for external coupling capacitors on the output in most applications, which is
particularly important for small battery-powered equipment. A unique feature of the TPA711 is that it allows the
amplifier to switch from BTL to SE on the fly when an earphone drive is required. This eliminates complicated
mechanical switching or auxiliary devices just to drive the external load. This device features a shutdown mode
for power-sensitive applications with special depop circuitry to eliminate speaker noise when exiting shutdown
mode. The TPA711 is available in an 8-pin SOIC and the surface-mount PowerPAD MSOP package, which
reduces board space by 50% and height by 40%.
Audio
Input
RF
RI
CI
CB
4 IN
2 BYPASS
VDD/2
â
+
From System Control
From HP Jack
â
+
1 SHUTDOWN
3 SE/BTL
Bias
Control
VDD 6
VO+ 5
VDD
CS
VOâ 8
7
GND
700 mW
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2002, Texas Instruments Incorporated
⢠POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1
|
▷ |