TPA701 Datasheet, PDF (1/22 Pages) Texas Instruments – 700-mW MONO LOW-VOLTAGE AUDIO POWER AMPLIFIER

TPA701
700-mW MONO LOW-VOLTAGE AUDIO POWER AMPLIFIER
D Fully Specified for 3.3-V and 5-V Operation
D Wide Power Supply Compatibility
2.5 V – 5.5 V
D Output Power for R_L = 8 Ω
– 700 mW at V_DD = 5 V, BTL
– 250 mW at V_DD = 3.3 V, BTL
D Ultra-Low Quiescent Current in Shutdown
Mode . . . 1.5 nA
D Thermal and Short-Circuit Protection
D Surface-Mount Packaging
– SOIC
– PowerPAD™ MSOP
SLOS229B – NOVEMBER1998 – REVISED MARCH 2000
D OR DGN PACKAGE
(TOP VIEW)
SHUTDOWN 1
8
V_O–
BYPASS 2
7
GND
IN+ 3
6
V_DD
IN– 4
5
V_O+
description
The TPA701 is a bridge-tied load (BTL) audio power amplifier developed especially for low-voltage applications
where internal speakers are required. Operating with a 3.3-V supply, the TPA701 can deliver 250-mW of
continuous power into a BTL 8-Ω load at less than 0.6% THD+N throughout voice band frequencies. Although
this device is characterized out to 20 kHz, its operation was optimized for narrower band applications such as
wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the
output in most applications, which is particularly important for small battery-powered equipment. This device
features a shutdown mode for power-sensitive applications with a supply current of 1.5 nA during shutdown.
The TPA701 is available in an 8-pin SOIC surface-mount package and the surface-mount PowerPAD MSOP,
which reduces board space by 50% and height by 40%.
Audio
Input
RF
RI
CI
CB
From System Control
4 ^{IN –}
3 IN+
2 BYPASS
VDD/2
–
+
–
+
1 SHUTDOWN
Bias
Control
VDD 6
VO+ 5
VDD
CS
VO– 8
7
GND
700 mW
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2000, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1