TPA2010D1_06 Datasheet, PDF (1/23 Pages) Texas Instruments – 2.5-W MONO FILTER-FREE CLASS-D AUDIO POWER AMPLIFIER

TPA2010D1
www.ti.com
SLOS417B – OCTOBER 2003 – REVISED JULY 2006
2.5-W MONO FILTER-FREE CLASS-D AUDIO POWER AMPLIFIER
FEATURES
• Maximum Battery Life and Minimum Heat
– Efficiency With an 8-Ω Speaker:
• 88% at 400 mW
• 80% at 100 mW
– 2.8-mA Quiescent Current
– 0.5-µA Shutdown Current
• Only Three External Components
– Optimized PWM Output Stage Eliminates
LC Output Filter
– Internally Generated 250-kHz Switching
Frequency Eliminates Capacitor and
Resistor
– Improved PSRR (–75 dB) and Wide Supply
Voltage (2.5 V to 5.5 V) Eliminates Need for
a Voltage Regulator
– Fully Differential Design Reduces RF
Rectification and Eliminates Bypass
Capacitor
– Improved CMRR Eliminates Two Input
Coupling Capacitors
• Wafer Chip Scale Packaging (WCSP)
– NanoFree™ Lead-Free (YZF)
– NanoStar™ SnPb (YEF)
APPLICATIONS
• Ideal for Wireless or Cellular Handsets and
PDAs
DESCRIPTION
The TPA2010D1 (sometimes referred to as
TPA2010) is a 2.5-W high efficiency filter-free
class-D audio power amplifier (class-D amp) in a
1,45 mm × 1,45 mm wafer chip scale package
(WCSP) that requires only three external
components.
Features like 88% efficiency, –75-dB PSRR,
improved RF-rectification immunity, and 8 mm² total
PCB area make the TPA2010D1 (TPA2010) class-D
amp ideal for cellular handsets. A fast start-up time
of 1 ms with minimal pop makes the TPA2010D1
(TPA2010) ideal for PDA applications.
In cellular handsets, the earpiece, speaker phone,
and melody ringer can each be driven by the
TPA2010D1. The TPA2010D1 allows independent
gain while summing signals from seperate sources,
and has a low 36 µV noise floor, A-weighted.
APPLICATION CIRCUIT
+ ^RI
Differential
Input
- ^RI
SHUTDOWN
Internal
Oscillator
To Battery
V_DD
C_S
IN-
_
+
IN+
PWM
H-
V_O+
Bridge
V_O-
Bias
Circuitry
GND
TPA2010D1
9-BALL
WAFER CHIP SCALE
YZF, YEF PACKAGES
TPA2010D1 DIMENSIONS
(TOP VIEW OF PCB)
IN+
GND
V_O-
A1
A2
A3
1,55 mm
V_DD
PV_DD
GND
1,40 mm
B1
B2
B3
IN- SHUTDOWN V_O+
C1
C2
C3
1,55 mm
1,40 mm
Note: Pin A1 is marked with a “0” for
Pb-free (YZF) and a “1” for SnPb (YEF).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree, NanoStar are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2006, Texas Instruments Incorporated