TPA0253 Datasheet, PDF (1/7 Pages) Texas Instruments – 1-W MONO AUDIO POWER AMPLIFIER WITH HEADPHONE DRIVE

D Ideal for Notebook Computers, PDAs, and
Other Small Portable Audio Devices
D 1 W Into 8-Ω From 5-V Supply
D 0.3 W Into 8-Ω From 3-V Supply
D Stereo Head Phone Drive
D Mono (BTL) Signal Created by Summing
Left and Right Signals Internally
D Wide Power Supply Compatibility
2.5 V to 5.5 V
D Low Supply Current
– 3.2 mA Typical at 5 V
– 2.7 mA Typical at 3 V
D Shutdown Control . . . 1 µA Typical
D Shutdown Pin is TTL Compatible
D –40°C to 85°C Operating Temperature
Range
D Space-Saving, Thermally-Enhanced MSOP
Packaging
TPA0253
1-W MONO AUDIO POWER AMPLIFIER
WITH HEADPHONE DRIVE
SLOS280B – JANUARY 2000 – REVISED MARCH 2000
DGQ PACKAGE
(TOP VIEW)
FILT–CAP
1
SHUTDOWN
2
V_DD
3
BYPASS
4
RIN
5
10
LO/MO–
9
LIN
8
GND
7
ST/MN
6
RO/MO+
description
The TPA0253 is a 1-W mono bridge-tied-load (BTL) amplifier designed to drive speakers with as low as 8-Ω
impedance. The mono signal is created by summing left and right inputs internally. The amplifier can be
reconfigured on-the-fly to drive two stereo single-ended (SE) signals into head phones. This makes the device
ideal for use in small notebook computers, PDAs, digital personal audio players, anyplace a mono speaker and
stereo head phones are required. From a 5-V supply, the TPA0253 can delivery 1-W of power into a 8-Ω speaker.
The gain of the input stage is set by the user-selected input resistor and a 50-kΩ internal feedback resistor
(A_V = – R_F/ R_I). The power stage is internally configured with a gain of –1.25 V/V in SE mode, and –2.5 V/V in
BTL mode. Thus, the overall gain of the amplifier is 62.5 kΩ/ R_I in SE mode and 125 kΩ/ R_I in BTL mode. The
input terminals are high-impedance CMOS inputs, and can be used as summing nodes.
The TPA0253 is available in the 10-pin thermally-enhanced MSOP package (DGQ) and operates over an
ambient temperature range of –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated
1