English
Language : 

TMS470PLF111 Datasheet, PDF (1/63 Pages) Texas Instruments – 16/32-BIT RISC FLASH MICROCONTROLLER
TMS470PLF111
16/32-BIT RISC FLASH MICROCONTROLLER
z High-Performance Static CMOS Technology
z TMS470 16/32-Bit RISC Core (ARM7TDMI™)
– 24-MHz System Clock (48-MHz Pipeline)
– Independent 16/32-Bit Instruction Set
– Open Architecture With Third-Party Support
– Built-In Debug Module
z Integrated Memory
– 128K-Byte Program Flash
– One Bank With 10 Contiguous Sectors
– 32K-Byte Program Flash with ECC
– One Bank with 4 Contiguous Sectors
– 8K-Byte Static RAM (SRAM)
z Operating Features
– Low-Power Modes: Doze and Sleep
– Industrial/Automotive Temperature Ranges
z System Module
– 32-Bit Address Space Decoding
– Bus Supervision for Memory/Peripherals
– Real-Time Interrupt (RTI) Timer
– Digital Watchdog (DWD) Timer
– Analog Watchdog (AWD) Timer
– Vectored Interrupt Module (VIM) with 32
Channels
– System Integrity and Failure Detection
– ICE Breaker
– Cyclic Redundancy Checker (CRC) with
Parallel Signature Analysis (PSA)
z Frequency-Modulated Zero-Pin Phase-Locked
Loop (FMZPLL)-Based Clock Module With
Prescaler
– Multiply-by-8 Internal FMZPLL Option
z Six Communication Interfaces:
– Serial Peripheral Interface (SPI)
– 255 Programmable Baud Rates
– Two Local Interconnect Network Interfaces
(LINs)
– Supports the Serial Communication
Interface (SCI)
– Standard CAN Controller (SCC)
– 16-Mailbox Capacity
– Fully Compliant With CAN Protocol,
Version 2.0B
SPNS113 – OCTOBER 2006
– Class II Serial Interface B (C2SIb)
– Normal 10.4 Kbps and 4X Mode 41.6 Kbps
– Inter-Integrated Circuit (I2C) Module
– Multi-Master and Slave Interfaces
– Up to 400 Kbps (Fast Mode)
– 7- and 10-Bit Address Capability
z High-End Timer (HET)
– 29 Programmable I/O Channels:
– 25 High-Resolution Pins
– High-Resolution Share Feature (XOR)
– High-End Timer RAM
– 64-Instruction Capacity
z External Clock Prescale (ECP) Module
– Programmable Low-Frequency External
Clock (ECLK)
z 16-Channel 10-Bit Multi-Buffered ADC
(MibADC)
– 64-Word FIFO Buffer
– Single- or Continuous-Conversion Modes
– 1.55 μs Minimum Sample/Conversion Time
– Calibration Mode and Self-Test Features
z 34 Dedicated General-Purpose I/O (GIO) Pins
and 48 Additional Peripheral I/Os
z 32 External Interrupts
z On-Chip Scan-Base Emulation Logic,
IEEE Standard 1149.1(1) (JTAG) Test-Access
Port
z 144-Pin Pb-Free/Green Plastic Low-Profile
Quad Flatpack (PGE Suffix)
z Development System Support Tools Available
– Code Composer Studio™ Integrated
Development Environment (IDE)
– HET Assembler and Simulator
– Real-Time In-Circuit Emulation
– Flash Programming
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Code Composer Studio is a trademark of Texas Instruments.
ARM7TDMI is a trademark of Advanced RISC Machines Limited (ARM).
All trademarks are the property of their respective owners.
1 The test-access port is compatible with the IEEE Standard 1149.1-1990, IEEE Standard Test-Access Port and Boundary Scan Architecture
specification. Boundary scan is not supported on this device.
PRODUCTION DATA information is current as of publication
date. Products conform to specifications per the Texas
Instruments standard warranty. Production processing does
not necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443
1