English
Language : 

TLV61224_15 Datasheet, PDF (1/22 Pages) Texas Instruments – TLV61224 Single-Cell, High-Efficient, Step-Up Converter in 6-Pin SC-70 Package
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TLV61224
SLVSAM7A – MARCH 2011 – REVISED MAY 2015
TLV61224 Single-Cell, High-Efficient, Step-Up Converter in 6-Pin SC-70 Package
1 Features
•1 Up to 94% Efficiency at Typical Operating
Conditions
• 5-μA Quiescent Current
• Operating Input Voltage From 0.7 V to 3 V
• Pass-Through Function During Shutdown
• Output Current of More Than 40 mA From a 1.2-V
Input
• Typical Switch Current Rating 400 mA
• Output Overvoltage Protection
• Overtemperature Protection
• Fixed 3-V Output Voltage
• Small 6-Pin SC-70 Package
2 Applications
• Battery Powered Applications
– 1- to 2-Cell NiMH or Alkaline
– 1-Cell Li-Primary
• Consumer and Portable Medical Products
• Personal Care Products
3 Description
The TLV61224 device provides a power-supply
solution for products powered by either a single-cell
or 2-cell alkaline or NiMH, or 1-cell Li-primary battery.
Possible output currents depend on the input-to-
output voltage ratio. The boost converter is based on
a hysteretic controller topology using synchronous
rectification to obtain maximum efficiency at minimal
quiescent currents. The output voltage of this device
is set internally to a fixed output voltage of 3 V. The
converter can be switched off by a featured enable
pin. While being switched off, battery drain is
minimized. The device is offered in a 6-pin SC-70
package (DCK) measuring 2 mm × 2 mm to enable
small circuit layout size.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TLV61224
SOT (6)
2.00 mm × 1.25 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
VIN
0.8 V to VOUT
Typical Application Schematic
L1
L
4.7 µH
VOUT
C1
10 µF
VIN
FB
EN
GND
VOUT
C2
3.0 V
10 µF
TLV61224
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.