English
Language : 

TLV5610IPWRG4 Datasheet, PDF (1/22 Pages) Texas Instruments – 8-CHANNEL, 12-/10-/8-BIT, 2.7-V TO 5.5-V LOW POWER DIGITAL-TO-ANALOG CONVERTER WITH POWER DOWN
TLV5608
TLV5610
TLV5629
www.ti.com.................................................................................................................................................... SLAS268G – MAY 2000 – REVISED NOVEMBER 2008
8-CHANNEL, 12-/10-/8-BIT, 2.7-V TO 5.5-V LOW POWER
DIGITAL-TO-ANALOG CONVERTER WITH POWER DOWN
FEATURES
1
•2 Eight Voltage Output DACs in One Package
– TLV5610 . . . 12-Bit
– TLV5608 . . . 10-Bit
– TLV5629 . . . 8-Bit
• Programmable Settling Time vs Power
Consumption
– 1 µs In Fast Mode
– 3 µs In Slow Mode
• Compatible With TMS320 and SPI™ Serial
Ports
• Monotonic Over Temperature
• Low Power Consumption:
– 18 mW In Slow Mode at 3-V
– 48 mW In Fast Mode at 3-V
• Reference Input Buffers
• Power-Down Mode
• Buffered, High Impedance Reference Inputs
• Data Output for Daisy-Chaining
APPLICATIONS
• Digital Servo Control Loops
• Digital Offset and Gain Adjustment
• Industrial Process Control
• Machine and Motion Control Devices
• Mass Storage Devices
DW OR PW PACKAGE
(TOP VIEW)
DGND
1
DIN
2
SCLK
3
FS
4
PRE
5
OUTE
6
OUTF
7
OUTG
8
OUTH
9
AGND
10
20
DVDD
19
DOUT
18
LDAC
17
MODE
16
REF
15
OUTD
14
OUTC
13
OUTB
12
OUTA
11
AVDD
DESCRIPTION
The TLV5610, TLV5608, and TLV5629 are pin-compatible, eight-channel, 12-/10-/8-bit voltage output DACs
each with a flexible serial interface. The serial interface allows glueless interface to TMS320 and SPI, QSPI, and
Microwire serial ports. It is programmed with a 16-bit serial string containing 4 control and 12 data bits.
Additional features are a power-down mode, an LDAC input for simultaneous update of all eight DAC outputs,
and a data output which can be used to cascade multiple devices.
The resistor string output voltage is buffered by a rail-to-rail output amplifier with a programmable settling time to
allow the designer to optimize speed vs power dissipation. The buffered, high-impedance reference input can be
connected to the supply voltage.
Implemented with a CMOS process, the DACs are designed for single-supply operation from 2.7 V to 5.5 V, and
can operate on two separate analog and digital power supplies. The devices are available in 20-pin SOIC and
TSSOP packages.
TA
-40°C to 85°C
AVAILABLE OPTIONS
SMALL OUTLINE (DW)
TLV5610IDW
TLV5608IDW
TLV5629IDW
PACKAGE
TSSOP (PW)
TLV5610IPW
TLV5608IPW
TLV5629IPW
RESOLUTION
12
10
8
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SPI is a trademark of Motorola, Inc.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2008, Texas Instruments Incorporated
 ▷