TLV2632 Datasheet, PDF (1/24 Pages) Texas Instruments – FAMILY OF LOW POWER WIDE BANDWIDTH SINGLE SUPPLY OPERATIONAL AMPLIFIERS WITH AND WITHOUT SHUTDOWN

TLV2630, TLV2631
TLV2632, TLV2633
TLV2634, TLV2635
SLOS362A − JUNE 2001 − REVISED JANUARY 2005
FAMILY OF LOWĆPOWER WIDE BANDWIDTH SINGLE SUPPLY
OPERATIONAL AMPLIFIERS WITH AND WITHOUT SHUTDOWN
FEATURES
D Rail-To-Rail Output
D V_ICR Includes Ground
D Gain-Bandwidth Product . . . 9 MHz
D Supply Current . . . 730 µA/Channel
D Single, Duals, and Quad Versions
D Ultralow Power Down Mode
I_DD(SHDN) = 4 µA/Channel
D Specified Temperature Range
−40°C to 125°C . . . Industrial Grade
D Supply Voltage Range . . . 2.7 V to 5.5 V
D Ultrasmall Packaging
5 or 6 Pin SOT-23 (TLV2630/1)
8 or 10 Pin MSOP (TLV2632/3)
D Universal Op-Amp EVM (See SLOU060
for More Information)
Operational Amplifier
+
−
DESCRIPTION
The TLV263x single supply operational amplifiers
provide rail-to-rail output with an input range that
includes ground. The TLV263x takes the minimum
operating supply voltage down to 2.7 V over the
extended industrial temperature range (−40°C to
125°C) while adding the rail-to-rail output swing feature.
The TLV263x also provides a 9 MHz gain-bandwidth
product from only 730 µA of supply current. The
maximum recommended supply voltage is 5.5 V, which,
when coupled with a 2.7-V minimum, allows the devices
to be operated from lithium ion cells.
The combination of wide bandwidth, low noise, and low
distortion makes it ideal for high speed and high
resolution data converter applications. The ground
input range allows it to directly interface to ground rail
referred systems.
All members are available in PDIP and SOIC with the
singles in the small SOT-23 package, duals in the
MSOP, and quads in the TSSOP package.
The 2.7-V operation makes it compatible with Li-Ion
powered systems and the operating supply voltage
range of many micro-power microcontrollers available
today including TI’s MSP430.
DEVICE
OPAx343
OPAx743
TLV278x
TLV263x
TLV262x
OPAx353
VDD
[V]
2.5−5.5
3.5−12
1.8−3.6
2.7−5.5
2.7−5.5
2.7−5.5
IDD/ch
[µA]
850
1100
650
730
750
8000
AMPLIFIER SELECTION TABLE
VICR
[V]
GBW SLEW RATE
[MHz]
[V/µs]
−0.3 to VDD + 0.3
5.5
6
−0.1 to VDD + 0.1
7
10
−0.2 to VDD + 0.2
8
5
GND to VDD − 1
9
9.5
1 V to VDD + 0.2
11
10
−0.1 to VDD + 0.1
44
22
Vn, 1 kHz
[nV/√Hz]
25
30
9
50
27
7
IO
[mA]
40
20
10
28
28
40
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2001−2005, Texas Instruments Incorporated
www.ti.com
1