TL05X Datasheet, PDF (1/65 Pages) Texas Instruments – ENHANCED-JFET LOW-OFFSET OPERATIONAL AMPLIFIERS

D Direct Upgrades to TL07x and TL08x BiFET
Operational Amplifiers
D Faster Slew Rate (20 V/µs Typ) Without
Increased Power Consumption
TL05x, TL05xA, TL05xY
ENHANCED-JFET LOW-OFFSET
OPERATIONAL AMPLIFIERS
SLOS178 – FEBRUARY 1997
D On-Chip Offset Voltage Trimming for
Improved DC Performance and Precision
Grades Are Available (1.5 mV, TL051A)
D Available in TSSOP for Small Form-Factor
Designs
description
The TL05x series of JFET-input operational amplifiers offers improved dc and ac characteristics over the TL07x
and TL08x families of BiFET operational amplifiers. On-chip zener trimming of offset voltage yields precision
grades as low as 1.5 mV (TL051A) for greater accuracy in dc-coupled applications. Texas Instruments improved
BiFET process and optimized designs also yield improved bandwidth and slew rate without increased power
consumption. The TL05x devices are pin-compatible with the TL07x and TL08x and can be used to upgrade
existing circuits or for optimal performance in new designs.
BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without
sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with
high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than
bipolar or CMOS devices having comparable power consumption.
The TL05x family was designed to offer higher precision and better ac response than the TL08x with the low
noise floor of the TL07x. Designers requiring significantly faster ac response or ensured lower noise should
consider the Excalibur TLE208x and TLE207x families of BiFET operational amplifiers.
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
SMALL
AT 25°C _OUTLINE†
CHIP
CARRIER
CERAMIC CERAMIC
DIP
DIP
(D)
(FK)
(J)
(JG)
800 µV
TL051ACD
TL052ACD
—
—
—
0°C to 70°C
TL051CD
1.5 mV
TL052CD
—
—
—
TL054ACD
4 mV
TL054CD
—
—
—
800 µV
TL051AID
TL052AID
—
—
—
TL051ID
– 40°C to 85°C
1.5 mV
TL052ID
—
—
—
TL054AID
4 mV
TL054ID
—
—
800 µV
TL051AMD TL051AMFK
TL052AMD TL052AMFK
—
TL051AMJG
TL052AMJG
– 55°C to 125°C
1.5 mV
TL051MD TL051MFK
TL052MD TL052MFK
TL054AMD TL054AMFK
TL054AMJ
TL051MJG
TL052MJG
4 mV
TL054MD TL054MFK TL054MJ
—
† _{The D packages are available taped and reeled. Add R suffix to device type (e.g., TL054CDR).}
‡ _{Chip forms are tested at 25°C.}
PLASTIC
DIP
(N)
—
TL054ACN
TL054CN
—
TL054AIN
TL054IN
—
TL054AMN
TL054MN
PLASTIC
DIP
(P)
TL051ACP
TL052ACP
TL051CP
TL052CP
—
TL051AIP
TL052AIP
TL051IP
TL052IP
—
TL051AMP
TL052AMP
TL051MP
TL052MP
—
CHIP
FORM‡
(Y)
TL051Y
TL052Y
TL054Y
—
—
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1997, Texas Instruments Incorporated
1