TIL308 Datasheet, PDF (1/7 Pages) Texas Instruments – NUMERIC DISPLAYS WITH LOGIC

TIL308, TIL309
NUMERIC DISPLAYS WITH LOGIC
SLBS002–D1096, MARCH 1972–REVISED SEPTEMBER 1992
SOLID-STATE DISPLAYS WITH INTEGRAL TTL MSI CIRCUIT CHIP FOR USE
IN ALL SYSTEMS REQUIRING A DISPLAY OF BCD DATA
• 6,9-mm (0.270-Inch) Character Height
• Internal TTL MSI Chip With Latch, Decoder,
• TIL308 Has Left Decimal
• TIL309 Has Right Decimal
• Easy System Interface
and Driver
• Constant-Current Drive for Light-Emitting
Diodes
• Wide Viewing Angle
mechanical data
These assemblies consist of display chips and a TTL MSI chip mounted on a header with a red molded plastic
body. Multiple displays may be mounted on 11,43-mm (0.450-inch) centers.
PIN ASSIGNMENTS
Pin 1
Pn 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
QB
QC
QD
QA
LS
C
D
GND
Pin 9
Pin 10
Pin 11
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
NC
B
BI
DP
LT
QDP
A
VCC
Seating Plane
(see Note A)
4,32 (0.170) MIN
3,56 (0.140)
2,79 (0.110)
CL of Pin 1
3,81 (0.150)
CL of Pin 1
2,54 (0.100)
4,42 (0.174)
Decimal Point
TIL309
6,45 (0.254)
10°
7,87 (0.310)
7,62 (0.300)
4,45 (0.175)
3,94 (0.155)
4 Places
0,56 (0.022)
0,46 (0.018)
DIA All Pins
1,52 (0.060)
1,02 (0.040)
1
0,66 (0.026)
3,80 (0.150)
0,66 (0.026)
3,81 (0.150)
2,54 (0.100) T.P.
14 Places
(see Note C)
26,67 (1.050)
25,65 (1.010)
Logic Chip
Decimal Point
TIL308
TIL308
TIL309
A
A
FG B
FG B
TOP VIEW
E
C
D.P. _D
E
D
C
D.P.
ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES
10,67 (0.420)
9,65 (0.380)
NOTES: A. Lead dimensions are not controlled above the seating plane.
B. Centerlines of character segments and decimal points are shown as dashed lines. Associated dimensions are nominal.
C. The true-position pin spacing is 2,54 mm (0.100 inch) between centerlines. Each centerline is located with 0,26 mm (0.010 inch) of
its true longitudinal position relative to pins 1 and 16.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1992, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1