TFP510 Datasheet, PDF (1/27 Pages) Texas Instruments – TI PANEL BUS DIGITAL TRANSMITTER

TFP510
TI PanelBusā DIGITAL TRANSMITTER
D Digital Visual Interface (DVI) Compliant¹
D Supports Resolutions From VGA to UXGA
(25-MHz–165-MHz Pixel Rates)
D Universal Graphics Controller Interface
– 12-Bit, Dual-Edge and 24-Bit,
Single-Edge Input Modes
– Adjustable 1.1-V to 1.8-V and Standard
3.3-V CMOS Input Signal Levels
– Fully Differential and Single-Ended Input
Clocking Modes
– Standard Intel 12-Bit Digital Video Port
Compatible as on Intel 81x Chipsets
D Enhanced PLL Noise Immunity
– On-Chip Regulators and Bypass
Capacitors for Reducing Systems Costs
D Enhanced Jitter Performance
SLDS146B – JANUARY 2002 – REVISED DECEMBER 2002
– No HSYNC Jitter Anomaly
– Negligible Data-Dependent Jitter
D Programmable Using I²C Serial Interface
D Monitor Detection Through Hot-Plug and
Receiver Detection
D Single 3.3-V Supply Operation
D 64-Pin TQFP Using TI’s PowerPAD
Package
D TI’s Advanced 0.18 µm EPIC-5 CMOS
Process Technology
D Pin Compatible With SiI164 and SiI168 DVI
Transmitters
D High-Bandwidth Digital Content Protection
(HDCP) Specifications Compliant²
description
The TFP510 is a Texas Instruments PanelBus flat panel display product, part of a comprehensive family of
end-to-end DVI 1.0 compliant solutions, targeted at the PC and consumer electronics industry.
The TFP510 provides a universal interface to allow a glueless connection to most commonly available graphics
controllers. Some of the advantages of this universal interface include selectable bus widths, adjustable signal
levels, and differential and single-ended clocking. The adjustable 1.1-V to 1.8-V digital interface provides a
low-EMI, high-speed bus that connects seamlessly with 12-bit or 24-bit interfaces. The DVI interface supports
flat panel display resolutions up to UXGA at 165 MHz in 24-bit true color pixel format.
The TFP510 combines PanelBus circuit innovation with TI’s advanced 0.18 µm EPIC-5 CMOS process
technology and TI’s ultralow ground inductance PowerPAD package. The result is a compact 64-pin TQFP
package providing a reliable, low-noise, high-speed digital interface solution.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Footnotes:
1. The digital visual interface (DVI) specification is an industry standard developed by the digital display working group (DDWG) for
high-speed digital connection to digital displays. The TFP510 is compliant to the digital visual interface (DVI) Revision 1.0
specification. The DVI 1.0 specification has been adopted by the industry leading PC and consumer electronics manufacturers.
2. .The high–bandwidth digital content protection system (HDCP) is an industry standard for protecting DVI outputs from being copied.
HDCP was developed by Intel Corporation and is licensed by the Digital Content Protection, LLC. The TFP510 is compliant to the
HDCP Rev. 1.0 specification.
PanelBus, PowerPAD, and EPIC-5 are trademarks of Texas Instruments.
Intel is a trademark of Intel Corporation.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2002, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1