TAS5614 Datasheet, PDF (1/26 Pages) Texas Instruments – 150W STEREO / 300W MONO PurePath™ HD DIGITAL-INPUT POWER STAGE

TAS5614
www.ti.com
SLAS680 – DECEMBER 2009
150W STEREO / 300W MONO PurePath™ HD DIGITAL-INPUT POWER STAGE
Check for Samples: TAS5614
FEATURES
1
•23 PurePath™ HD Enabled Integrated Feedback
Provides:
APPLICATIONS
• Home Theater Systems
• AV Receivers
– Signal Bandwidth up to 80kHz for High
Frequency Content From HD Sources
• DVD/Blu-ray Receivers
• Mini Combo Systems
– Ultralow 0.03% THD at 1W into 4Ω
• Active Speakers and Subwoofers
– Flat THD at all Frequencies for Natural
Sound
DESCRIPTION
– 80dB PSRR (BTL, No Input Signal)
– >100dB (A weighted) SNR
– Click and Pop Free Startup
• Pin compatible with TAS5631, TAS5616 and
TAS5612
• Multiple Configurations Possible on the Same
PCB With Stuffing Options:
– Mono Parallel Bridge Tied Load (PBTL)
The TAS5614 is a high performance analog input
Class D amplifier with integrated closed loop
feedback technology (known as PurePath™ HD) with
the ability to drive up to 150W ⁽¹⁾ Stereo into 4 to 8 Ω
Speakers from a single 36V supply.
PurePath™ HD technology enables traditional
AB-Amplifier performance (<0.03% THD) levels while
providing the power efficiency of traditional class D
amplifiers.
– Stereo Bridge Tied Load (BTL)
– 2.1 Single Ended Stereo Pair and Bridge
Tied Load Subwoofer
• Total Output Power at 10%THD+N
– 300W in Mono PBTL Configuration
Unlike traditional Class D amplifiers, the distortion
curve only increases once the output levels move into
clipping. PurePath™ HD Power PAD™
PurePath™ HD technology enables lower idle losses
making the device even more efficient.
– 150W per Channel in Stereo BTL
Configuration
• Total Output Power in BTL Configuration at
1%THD+N
TOTAL HARMONIC DISTORTION+NOISE
VS
OUTPUT POWER
10
4Ohm (6kHz)
4Ohm (1kHz)
– 160W Stereo into 3Ω
1
– 125W Stereo into 4Ω
– 85W Stereo into 6Ω
0,1
– 65W Stereo into 8Ω
• >90% Efficienct Power Stage With 60-mΩ
0,01
Output MOSFETs
• Self-Protection Design (Including
Undervoltage, Overtemperature, Clipping, and
Short-Circuit Protection) With Error Reporting
• EMI Compliant When Used With
Recommended System Design
TC = 75 C
CONFIG = BTL
0,001
0,01
1
100
P_O - Output Power - W
• Two Thermally Enhanced Package Options:
– PHD (64-Pin QFP)
– DKD (44-Pin PSOP3)
(1) Achievable output power levels are dependent on the thermal
configuration of the target application. A high performance
thermal interface material between the package exposed
heatslug and the heat sink should be used to achieve high
output power levels.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PurePath, Power PAD are trademarks of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated