SNJ55LBC173 Datasheet, PDF (1/8 Pages) Texas Instruments – QUADRUPLE LOW-POWER DIFFERENTIAL RECEIVER

SN55LBC173
QUADRUPLE LOW-POWER DIFFERENTIAL RECEIVER
SGLS081 – MARCH 1995
D Meets EIA Standards RS-422-A, RS-423-A,
RS-485, and CCITT V.11
D Designed to Operate With Pulse Durations
as Short as 20 ns
D Designed for Multipoint Bus Transmission
on Long Bus Lines in Noisy Environments
D Input Sensitivity . . . ± 200 mV
D Low-Power Consumption . . . 20 mA Max
D Open-Circuit Fail-Safe Design
D Pin Compatible With SN75173 and
AM26LS32
J OR W PACKAGE
(TOP VIEW)
1B 1
1A ²
1Y ³
G⁴
2Y ⁵
2A ⁶
2B ⁷
GND ⁸
16 V_CC
15 4B
14 4A
13 _4Y
12 _G
11 _3Y
10 _3A
9 _3B
description
The SN55LBC173 is a monolithic quadruple
differential line receiver with 3-state outputs and is
designed to meet the requirements of the EIA
standards RS-422-A, RS-423-A, RS-485, and
CCITT V.11. This device is optimized for balanced
multipoint bus transmission at data rates up to and
exceeding 10 million bits per second. The four
receivers share two ORed enable inputs, one
active when high, the other active when low. Each
receiver features high input impedance, input
hysteresis for increased noise immunity, and input
sensitivity of ± 200 mV over a common-mode input
voltage range of 12 V to –7 V. Fail-safe design
ensures that if the inputs are open circuited, the
output is always high. The SN55LBC173 is
designed using the Texas Instruments proprietary
LinBiCMOS™ technology that provides low power
consumption, high switching speeds, and
robustness.
FK PACKAGE
(TOP VIEW)
3 2 1 20 19
1Y ₄
18 ^4A
G₅
17 ^4Y
NC ₆
16 ^NC
2Y ₇
15 ^G
2A ₈
14 ^3Y
9 10 11 12 13
NC – No internal connection
This device offers optimum performance when used with the SN55LBC172M quadruple line driver. The
SN55LBC173 is available in the 16-pin CDIP (J), the 16-pin CPAK (W), or the 20-pin LCCC (FK) packages.
The SN55LBC173 is characterized over the military temperature range of – 55°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinBiCMOS is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1995, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1