SN75LVDS32_07 Datasheet, PDF (1/19 Pages) Texas Instruments – HIGH-SPEED DIFFERENTIAL LINE RECEIVERS

SN75LVDS32, SN75LVDS9637
HIGH-SPEED DIFFERENTIAL LINE RECEIVERS
D Meets or Exceeds the Requirements of
ANSI TIA/EIA-644 Standard
D Operates With a Single 3.3-V Supply
D Designed for Signaling Rate of up to
155 Mbps
D Differential Input Thresholds ± 100 mV Max
D Low-Voltage TTL (LVTTL) Logic Output
Levels
D Open-Circuit Fail Safe
D Characterized For Operation From
0°C to 70°C
SLLS360B – JUNE 1999 – REVISED JUNE 2001
SN75LVDS32D (Marked as 75LVDS32)
SN75LVDS32PW (Marked as DS32)
(TOP VIEW)
1B 1
1A 2
1Y 3
G4
2Y 5
2A 6
2B 7
GND 8
16 V_CC
15 4B
14 4A
13 4Y
12 G
11 3Y
10 3A
9 3B
description
The SN75LVDS32 and SN75LVDS9637 are
SN75LVDS9637D (Marked as DF637 or 7L9637)
SN75LVDS9637DGK (Marked as AXI)
(TOP VIEW)
differential line receivers that implement the
electrical characteristics of low-voltage differential
signaling (LVDS). This signaling technique lowers
the output voltage levels of 5-V differential
standard levels (such as EIA/TIA-422B) to reduce
V_{CC 1}
1Y ₂
2Y 3
GND 4
8 1A
7 1B
6 2A
5 2B
the power, increase the switching speeds, and
allow operation with a 3.3-V supply rail. Any of the four differential receivers provides a valid logical output state
with a ±100 mV allow operation with a differential input voltage within the input common-mode voltage range.
The input common-mode voltage range allows 1 V of ground potential difference between two LVDS nodes.
The intended application of these devices and signaling technique is both point-to-point and multidrop (one
driver and multiple receivers) data transmission over controlled impedance media of approximately 100 Ω. The
transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance
of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the
environment.
The SN75LVDS32 and SN75LVDS9637 are characterized for operation from 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2001 Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1