SN75C3222 Datasheet, PDF (1/12 Pages) Texas Instruments – 3-V TO 5.5-V MULTICHANNEL RS-232 COMPATIBLE LINE DRIVER/RECEIVER

ą
SN65C3222, SN75C3222
3ĆV TO 5.5ĆV MULTICHANNEL RSĆ232 COMPATIBLE LINE DRIVER/RECEIVER
ą
SLLS534B − MAY 2002 − REVISED OCTOBER 2004
D Operates With 3-V to 5.5-V V_CC Supply
D Operates Up To 1 Mbit/s
D Low Standby Current . . . 1 µA Typ
D External Capacitors . . . 4 × 0.1 µF
D Accepts 5-V Logic Input With 3.3-V Supply
D RS-232 Bus-Pin ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM)
D Applications
− Battery-Powered Systems, PDAs,
Notebooks, Laptops, Palmtop PCs, and
Hand-Held Equipment
DB, DW, OR PW PACKAGE
(TOP VIEW)
EN 1
C1+ 2
V+ 3
C1− 4
C2+ 5
C2− 6
V− 7
DOUT2 8
RIN2 ⁹
ROUT2 ¹⁰
20 PWRDOWN
19 V_CC
18 GND
17 DOUT1
16 RIN1
15 ROUT1
14 NC
13 DIN1
12 _DIN2
11 _NC
description/ordering information
NC − No internal connection
The SN65C3222 and SN75C3222 consist of two line drivers, two line receivers, and a dual charge-pump circuit
with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The devices provide the
electrical interface between an asynchronous communication controller and the serial-port connector. The
charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices
operate at data signaling rates up to 1 Mbit/s and a driver output slew rate of 24 V/µs to 150 V/µs.
The SN65C3222 and SN75C3222 can be placed in the power-down mode by setting PWRDOWN low, which
draws only 1 µA from the power supply. When the devices are powered down, the receivers remain active while
the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is
disabled, V+ is lowered to V_CC, and V− is raised toward GND. Receiver outputs also can be placed in the
high-impedance state by setting EN high.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
SOIC (DW)
Tube of 25
Reel of 2000
SN75C3222DW
SN75C3222DWR
75C3222
−0°C to 70°C
SSOP (DB)
TSSOP (PW)
Reel of 2000
Tube of 70
Reel of 2000
SN75C3222DBR
SN75C3222PW
SN75C3222PWR
CA3222
CA3222
SOIC (DW)
Tube of 25
Reel of 2000
SN65C3222DW
SN65C3222DWR
65C3222
−40°C to 85°C
SSOP (DB)
Reel of 2000 SN65C3222DBR
CB3222
TSSOP (PW)
Tube of 70
Reel of 2000
SN65C3222PW
SN65C3222PWR
CB3222
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are}
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004, Texas Instruments Incorporated
1