SN75374_06 Datasheet, PDF (1/15 Pages) Texas Instruments – QUADRUPLE MOSFET DRIVER

SN75374
QUADRUPLE MOSFET DRIVER
SLRS028A − SEPTEMBER 1988 − REVISED NOVEMBER 2004
D Quadruple Circuits Capable of Driving
High-Capacitance Loads at High Speeds
D Output Supply Voltage Range From 5 V
to 24 V
D Low Standby Power Dissipation
D V_CC3 Supply Maximizes Output Source
Voltage
description/ordering information
The SN75374 is a quadruple NAND interface
circuit designed to drive power MOSFETs from
TTL inputs. It provides the high current and
voltage necessary to drive large capacitive loads
at high speeds.
D OR N PACKAGE
(TOP VIEW)
V_CC2 1
1Y 2
1A 3
1E1 4
1E2 5
2A 6
2Y 7
GND 8
16 V_CC1
15 4Y
14 4A
13 2E2
12 2E1
11 3A
10 3Y
9 V_CC3
The outputs can be switched very close to the V_CC2 supply rail when V_CC3 is about 3 V higher than V_CC2. V_CC3
also can be tied directly to V_CC2 when the source voltage requirements are lower.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP (N) Tube of 25
SN75374N
SN75374N
0°C to 70°C
SOIC (D)
Tube of 40
Reel of 2500
SN75374D
SN75374DR
SN75374
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design}
guidelines are available at www.ti.com/sc/package.
logic diagram (positive logic)
4
1E1
5
1E2
12
2E1
13
2E2
2
3
1A
7
2A ⁶
10
11
3A
15
14
4A
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004, Texas Instruments Incorporated
1