SN75196 Datasheet, PDF (1/12 Pages) Texas Instruments – MULTIPLE RS-232 DRIVERS AND RECEIVERS

SN75196
MULTIPLE RS-232 DRIVERS AND RECEIVERS
D Single Chip With Easy Interface Between
UART and Serial-Port Connector of an
External Modem or Other Computer
Peripheral
D Five Drivers and Three Receivers Meet or
Exceed the Requirements of TIA/EIA-232-F
and ITU Recommendation V.28
D Designed to Support Data Rates up to
120 kbit/s
D ESD Protection Meets Or Exceeds 10 kV on
RS-232 Pins and 5 kV on All Other Pins
(Human-Body Model)
D Complement to the SN75185
D Pin-to-Pin Replacement for the Goldstar
GD75323
D Functional Replacement for the MC145405
SLLS188B – MAY 1995 – REVISED APRIL 1998
DW OR N PACKAGE
(TOP VIEW)
V_CC 1
1DA 2
2DA 3
3DA 4
1RY 5
2RY 6
4DA 7
3RY 8
5DA 9
GND ¹⁰
20 V_DD
19 1DY
18 2DY
17 3DY
16 1RA
15 2RA
14 4DY
13 3RA
12 5DY
11 _VSS
description
The SN75196 combines five drivers and three receivers from the trade-standard SN75188 and SN75189
bipolar quadruple drivers and receivers, respectively. The flow-through design of the SN75196 decreases the
part count, reduces the board space required, and allows easy interconnection of the UART and serial-port
connector. The all-bipolar circuits and processing of the SN75196 provide a rugged, low-cost solution for this
function.
The SN75196 complies with the requirements of TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards.
These standards are for data interchange between a host computer and peripheral at signal rates of up to
20 kbit/s. The switching speeds of the SN75196 are fast enough to support rates of up to 120 kbit/s with lower
capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be assured unless the
designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling
rates of up to 120 kbit/s, use of TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards are
recommended.
The SN75196 is characterized for operation over a temperature range of 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1998, Texas Instruments Incorporated
1