SN74LVCZ245A Datasheet, PDF (1/6 Pages) Texas Instruments – OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

D EPIC™ (Enhanced-Performance Implanted
CMOS) Submicron Process
D Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
D Typical V_OHV (Output V_OH Undershoot) >2 V
at V_CC = 3.3 V, T_A = 25°C
D I_off and Power-Up 3-State Support Hot
Insertion
D Supports Mixed-Mode Signal Operation on
All Ports (5-V Input/Output Voltage With
3.3-V V_CC)
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D Package Options Include Shrink
Small-Outline (DB), Plastic Thin Very
Small-Outline (DGV), Small-Outline (DW),
and Thin Shrink Small-Outline (PW)
Packages
SN74LVCZ245A
OCTAL BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES275B – JUNE 1999 – REVISED JANUARY 2000
DB, DGV, DW, OR PW PACKAGE
(TOP VIEW)
DIR 1
A1 2
A2 3
A3 4
A4 5
A5 6
A6 7
A7 8
A8 9
GND ¹⁰
20 V_CC
19 OE
18 B1
17 B2
16 B3
15 B4
14 B5
13 B6
12 B7
11 _B8
description
This octal bus transceiver is designed for 2.7-V to 3.6-V V_CC operation.
The SN74LVCZ245A is designed for asynchronous communication between data buses. The device transmits
data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the
direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are
effectively isolated.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
When V_CC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down.
However, to ensure the high-impedance state above 1.5 V, OE should be tied to V_CC through a pullup resistor;
the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry
disables the outputs, preventing damaging current backflow through the device when it is powered down. The
power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down,
which prevents driver conflict.
The SN74LVCZ245A is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
INPUTS
OE DIR
OPERATION
L
L
B data to A bus
L
H A data to B bus
H
X
Isolation
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2000, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1