SN74LVC861A Datasheet, PDF (1/8 Pages) Texas Instruments – 10-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS

D EPIC™ (Enhanced-Performance Implanted
CMOS) Submicron Process
D Typical V_OLP (Output Ground Bounce)
< 0.8 V at V_CC = 3.3 V, T_A = 25°C
D Typical V_OHV (Output V_OH Undershoot)
> 2 V at V_CC = 3.3 V, T_A = 25°C
D Power Off Disables Outputs, Permitting
Live Insertion
D Supports Mixed-Mode Signal Operation on
All Ports (5-V Input/Output Voltage With
3.3-V V_CC)
D ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D Latch-Up Performance Exceeds 250 mA Per
JESD 17
D Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages
SN74LVC861A
10-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCAS309F – MARCH 1993 – REVISED JUNE 1998
DB, DW, OR PW PACKAGE
(TOP VIEW)
OEBA 1
A1 2
A2 3
A3 4
A4 5
A5 6
A6 7
A7 8
A8 9
A9 10
A10 11
GND 12
24 V_CC
23 B1
22 B2
21 B3
20 B4
19 B5
18 B6
17 B7
16 B8
15 B9
14 B10
13 OEAB
description
This 10-bit bus transceiver is designed for 1.65-V to 3.6-V V_CC operation.
The SN74LVC861A is designed for asynchronous communication between data buses. The control-function
implementation allows for maximum flexibility in timing.
This device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on
the logic levels at the output-enable (OEAB and OEBA) inputs.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN74LVC861A is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
INPUTS
OEAB OEBA
OPERATION
L
H
A data to B bus
H
L
B data to A bus
H
H
Isolation
L
L
Latch A and B
(A = B)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1998, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1