SN74LVC3G34 Datasheet, PDF (1/12 Pages) Texas Instruments – TRIPLE BUFFER GATE

SN74LVC3G34
TRIPLE BUFFER GATE
D Available in the Texas Instruments
NanoStar and NanoFree Packages
D Supports 5-V V_CC Operation
D Inputs Accept Voltages to 5.5 V
D Max t_pd of 4.1 ns at 3.3 V
D Low Power Consumption, 10-µA Max I_CC
D ±24-mA Output Drive at 3.3 V
D Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
D Typical V_OHV (Output V_OH Undershoot)
>2 V at V_CC = 3.3 V, T_A = 25°C
D I_off Supports Partial-Power-Down Mode
Operation
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
− 1000-V Charged-Device Model (C101)
SCES366H − AUGUST 2001 − REVISED SEPTEMBER 2003
DCT OR DCU PACKAGE
(TOP VIEW)
1A 1
3Y 2
2A 3
GND 4
8 V_CC
7 1Y
6 3A
5 2Y
YEA, YEP, YZA, OR YZP PACKAGE
(BOTTOM VIEW)
GND 4 5 2Y
2A 3 6 3A
3Y 2 7 1Y
1A 1 8 V_CC
description/ordering information
This triple buffer gate is designed for 1.65-V to 5.5-V V_CC operation. The SN74LVC3G34 performs the Boolean
function Y = A in positive logic.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING‡
NanoStar − WCSP (DSBGA)
0.17-mm Small Bump − YEA
SN74LVC3G34YEAR
−40°C to 85°C
NanoFree − WCSP (DSBGA)
0.17-mm Small Bump − YZA (Pb-free)
NanoStar − WCSP (DSBGA)
0.23-mm Large Bump − YEP
NanoFree − WCSP (DSBGA)
0.23-mm Large Bump − YZP (Pb-free)
Reel of 3000
SN74LVC3G34YZAR
SN74LVC3G34YEPR
SN74LVC3G34YZPR
_ _ _C9_
SSOP − DCT
Reel of 3000 SN74LVC3G34DCTR C34_ _ _
VSSOP − DCU
Reel of 3000
Reel of 250
SN74LVC3G34DCUR
SN74LVC3G34DCUT
C34_
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at}
www.ti.com/sc/package.
‡ _{DCT: The actual top-side marking has three additional characters that designate the year, month, and assembly/test site.}
DCU: The actual top-side marking has one additional character that designates the assembly/test site.
YEA/YZA, YEP/YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code,
and one following character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition
(1 = SnPb, • = Pb-free).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoStar and NanoFree are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2003, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1