SN74LVC32245 Datasheet, PDF (1/9 Pages) Texas Instruments – 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS

D Member of the Texas Instruments
Widebus+ Family
D Operates From 1.65 V to 3.6 V
D Inputs Accept Voltages to 5.5 V
D Max t_pd of 4 ns at 3.3 V
D Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
SN74LVC32245
32-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES343D – OCTOBER 2000 – REVISED JULY 2003
D Typical V_OHV (Output V_OH Undershoot)
>2 V at V_CC = 3.3 V, T_A = 25°C
D I_off Supports Partial-Power-Down Mode
Operation
D Supports Mixed-Mode Signal Operation on
All Ports (5-V Input/Output Voltage With
3.3-V V_CC)
description/ordering information
This 32-bit noninverting bus transceiver is designed for 1.65-V to 3.6-V V_CC operation.
The SN74LVC32245 is designed for asynchronous communication between data buses. The control-function
implementation minimizes external timing requirements.
This device can be used as four 8-bit transceivers, two 16-bit transceivers, or one 32-bit transceiver. It allows
data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at
the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the
buses are effectively isolated.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
LFBGA – GKE
–40°C to 85°C
Tape and reel
LFBGA – ZKE (Pb-free)
SN74LVC32245GKER
SN74LVC32245ZKER
NC245
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines}
are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus+ is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2003, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1