SN74LVC1G125-Q1 Datasheet, PDF (1/8 Pages) Texas Instruments – SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT

D Qualification in Accordance With
AEC-Q100^†
D Qualified for Automotive Applications
D Customer-Specific Configuration Control
Can Be Supported Along With
Major-Change Approval
D Available in the Texas Instruments
NanoStar and NanoFree Packages
D Supports 5-V V_CC Operation
D Inputs Accept Voltages to 5.5 V
D Max t_pd of 3.7 ns at 3.3 V
D Low Power Consumption, 10-µA Max I_CC
D ±24-mA Output Drive at 3.3 V
† _{Contact factory for details. Q100 qualification data available on}
request.
SN74LVC1G125ĆQ1
SINGLE BUS BUFFER GATE
WITH 3ĆSTATE OUTPUT
SGES002A − APRIL 2003 − REVISED MAY 2004
D I_off Supports Partial-Power-Down Mode
Operation
D Latch-Up Performance Exceeds 100 mA
Per JESD 78, Class II
D ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
− 1000-V Charged-Device Model (C101)
DCK PACKAGE
(TOP VIEW)
OE ¹
A²
GND ³
5 _VCC
4_Y
description/ordering information
This bus buffer gate is designed for 1.65-V to 5.5-V V_CC operation.
The SN74LVC1G125 is a single line driver with a 3-state output. The output is disabled when the output-enable
(OE) input is high.
NanoStar and NanoFree package technology is a major breakthrough in IC packaging concepts, using the
die as the package.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
TA
PACKAGE‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING^§
−40°C to 125°C SOT (SC-70) − DCK
Reel of 2875 1P1G125QDCKRQ1
CM_
‡ _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines}
are available at www.ti.com/sc/package.
§ _{DCK: The actual top-side marking has one additional character that designates the assembly/test site.}
FUNCTION TABLE
INPUTS
OE
A
OUTPUT
Y
L
H
H
L
L
L
H
X
Z
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoStar and NanoFree are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2004, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1