SN74LVC16245A_09 Datasheet, PDF (1/19 Pages) Texas Instruments – 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS

www.ti.com
FEATURES
1
•2 Member of the Texas Instruments Widebus™
Family
• Operates From 1.65 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max t_pd of 4 ns at 3.3 V
• Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
• Typical V_OHV (Output V_OH Undershoot)
>2 V at V_CC = 3.3 V, T_A = 25°C
• Supports Mixed-Mode Signal Operation on All
Ports (5-V Input/Output Voltage With
3.3-V V_CC)
• I_off Supports Partial-Power-Down Mode
Operation
• Latch-Up Performance Exceeds 250 mA Per
JESD 17
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
SN74LVC16245A
16-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES062O – DECEMBER 1995 – REVISED JANUARY 2008
DGG, DGV, OR DL PACKAGE
(TOP VIEW)
1DIR ¹
1B1 ²
1B2 ³
GND ⁴
1B3 ⁵
1B4 ⁶
V_CC ⁷
1B5 ⁸
1B6 ⁹
GND ¹⁰
1B7 ¹¹
1B8 ¹²
2B1 ¹³
2B2 ¹⁴
GND ¹⁵
2B3 ¹⁶
2B4 ¹⁷
V_CC ¹⁸
2B5 ¹⁹
2B6 ²⁰
GND ²¹
2B7 ²²
2B8 ²³
2DIR ²⁴
48 _1OE
47 _1A1
46 _1A2
45 _GND
44 _1A3
43 _1A4
42 _VCC
41 _1A5
40 _1A6
39 _GND
38 _1A7
37 _1A8
36 _2A1
35 _2A2
34 _GND
33 _2A3
32 _2A4
31 _VCC
30 _2A5
29 _2A6
28 _GND
27 _2A7
26 _2A8
25 _2OE
DESCRIPTION/ORDERING INFORMATION
This 16-bit (dual-octal) noninverting bus transceiver is designed for 1.65-V to 3.6-V V_CC operation.
The SN74LVC16245A is designed for asynchronous communication between data buses. The control-function
implementation minimizes external timing requirements.
This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the
A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR)
input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in
a mixed 3.3-V/5-V system environment.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1995–2008, Texas Instruments Incorporated