SN74HC4066_15 Datasheet, PDF (1/21 Pages) Texas Instruments – QUADRUPLE BILATERAL ANALOG SWITCH

SN74HC4066
QUADRUPLE BILATERAL ANALOG SWITCH
D Wide Operating Voltage Range of 2 V to 6 V
D Typical Switch Enable Time of 18 ns
D Low Power Consumption, 20-µA Max I_CC
D Low Input Current of 1 µA Max
D High Degree of Linearity
D High On-Off Output-Voltage Ratio
D Low Crosstalk Between Switches
D Low On-State Impedance . . .
50-Ω TYP at V_CC = 6 V
D Individual Switch Controls
SCLS325G – MARCH 1996 – REVISED JULY 2003
D, DB, N, NS, OR PW PACKAGE
(TOP VIEW)
1A 1
1B 2
2B 3
2A 4
2C 5
3C 6
GND 7
14 V_CC
13 1C
12 4C
11 4A
10 4B
9 3B
8 3A
description/ordering information
The SN74HC4066 is a silicon-gate CMOS quadruple analog switch designed to handle both analog and digital
signals. Each switch permits signals with amplitudes of up to 6 V (peak) to be transmitted in either direction.
Each switch section has its own enable input control (C). A high-level voltage applied to C turns on the
associated switch section.
Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for
analog-to-digital and digital-to-analog conversion systems.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP – N
Tube of 25
SN74HC4066N
SN74HC4066N
Tube of 50
SN74HC4066D
SOIC – D
Reel of 2500 SN74HC4066DR
HC4066
Reel of 250
SN74HC4066DT
–40°C to 85°C SOP – NS
SSOP – DB
Reel of 2000
Reel of 2000
SN74HC4066NSR
SN74HC4066DBR
HC4066
HC4066
Tube of 90
SN74HC4066PW
TSSOP – PW Reel of 2000 SN74HC4066PWR HC4066
Reel of 250
SN74HC4066PWT
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design}
guidelines are available at www.ti.com/sc/package.
FUNCTION TABLE
(each switch)
INPUT
CONTROL
(C)
SWITCH
L
OFF
H
ON
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2003, Texas Instruments Incorporated
1