English
Language : 

SN74F543 Datasheet, PDF (1/7 Pages) Texas Instruments – OCTAL REGISTERED TRANSCEIVER WITH 3-STATE OUTPUTS
SN74F543
OCTAL REGISTERED TRANSCEIVER
WITH 3-STATE OUTPUTS
SDFS025B – D2942, MARCH 1987 – REVISED OCTOBER 1993
• 3-State True Outputs
• Back-to-Back Registers for Storage
• Package Options Include Plastic
Small-Outline and Shrink Small-Outline
Packages and Standard Plastic 300-mil
DIPs
description
The SN74F543 octal transceiver contains two
sets of D-type latches for temporary storage of
data flowing in either direction. Separate
latch-enable (LEAB or LEBA) and output enable
(OEAB or OEBA) inputs are provided for each
register to permit independent control in either
direction of data flow. The A outputs are
characterized to sink 24 mA while the B outputs
are characterized to sink 64 mA.
DB, DW, OR NT PACKAGE
(TOP VIEW)
LEBA 1
OEBA 2
A1 3
A2 4
A3 5
A4 6
A5 7
A6 8
A7 9
A8 10
CEAB 11
GND 12
24 VCC
23 CEBA
22 B1
21 B2
20 B3
19 B4
18 B5
17 B6
16 B7
15 B8
14 LEAB
13 OEAB
The A-to-B enable (CEAB) input must be low in order to enter data from A or to output data from B. Having CEAB
low and LEAB low makes the A-to-B latches transparent; a subsequent low-to-high transition of LEAB puts the
A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the
data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA,
and OEBA inputs.
The SN74F543 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count
and functionality of standard small-outline packages in less than half the printed-circuit-board area.
The SN74F543 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE†
INPUTS
OUTPUT
CEAB LEAB OEAB A
B
H
X
X
X
Z
X
X
H
X
Z
L
H
L
X
B0‡
L
L
L
L
L
L
L
L
H
H
† A-to-B data flow is shown; B-to-A flow control is the
same except that it uses CEBA, LEBA, and OEBA.
‡ Output level before the indicated steady-state input
conditions were established.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1993, Texas Instruments Incorporated
2–1