SN74CB3Q3253 Datasheet, PDF (1/20 Pages) Texas Instruments – DUAL 1 OF 4 FET MULTIPLEXER/ DEMULTIPLEXER

www.ti.com
SN74CB3Q3253
DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER
2.5-V/3.3-V LOW-VOLTAGE HIGH-BANDWIDTH BUS SWITCH
SCDS145A – OCTOBER 2003 – REVISED MARCH 2005
FEATURES
• High-Bandwidth Data Path (up to 500 MHz ⁽¹⁾)
• 5-V Tolerant I/Os With Device Powered Up or
Powered Down
• Low and Flat ON-State Resistance (r_on)
Characteristics Over Operating Range
(r_on = 4 Ω Typ)
• Rail-to-Rail Switching on Data I/O Ports
– 0- to 5-V Switching With 3.3-V V_CC
– 0- to 3.3-V Switching With 2.5-V V_CC
• Bidirectional Data Flow With Near-Zero
Propagation Delay
• Low Input/Output Capacitance Minimizes
Loading and Signal Distortion
(C_io(OFF) = 3.5 pF Typ)
• Fast Switching Frequency (f_OE = 20 MHz Max)
(1) For additional information regarding the performance
characteristics of the CB3Q family, refer to the TI application
report CBT-C, CB3T, and CB3Q Signal-Switch Families,
literature number SCDA008.
• Data and Control Inputs Provide Undershoot
Clamp Diodes
• Low Power Consumption (I_CC = 0.6 mA Typ)
• V_CC Operating Range From 2.3 V to 3.6 V
• Data I/Os Support 0- to 5-V Signal Levels (0.8
V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V)
• Control Inputs Can be Driven by TTL or
5-V/3.3-V CMOS Outputs
• I_off Supports Partial-Power-Down Mode
Operation
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model (A114-B,
Class II)
– 1000-V Charged-Device Model (C101)
• Supports Both Digital and Analog
Applications: USB Interface, Differential
Signal Interface Bus Isolation, Low-Distortion
Signal Gating
DBQ, DGV, OR PW PACKAGE
(TOP VIEW)
RGY PACKAGE
(TOP VIEW)
1OE 1
S1 2
1B4 3
1B3 4
1B2 5
1B1 6
1A 7
GND 8
16 V_CC
15 2OE
14 S0
13 2B4
12 2B3
11 2B2
10 2B1
9 2A
1
S1 2
1B4 3
1B3 4
1B2 5
1B1 6
1A 7
8
16
15 2OE
14 S0
13 2B4
12 2B3
11 2B2
10 2B1
9
DESCRIPTION/ORDERING INFORMATION
The SN74CB3Q3253 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of
the pass transistor, providing a low and flat ON-state resistance (r_on). The low and flat ON-state resistance allows
for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device
also features low data I/O capacitance to minimize capacitive loading and signal distortion on the data bus.
Specifically designed to support high-bandwidth applications, the SN74CB3Q3253 provides an optimized
interface solution ideally suited for broadband communications, networking, and data-intensive computing
systems.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2005, Texas Instruments Incorporated