SN74AVC16T245 Datasheet, PDF (1/18 Pages) Texas Instruments – 16 BIT DUAL SUPPLY BUS TRANSCEIVER

SN74AVC16T245
16ĆBIT DUALĆSUPPLY BUS TRANSCEIVER
WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3ĆSTATE OUTPUTS
SCES551A – FEBRUARY 2004 – REVISED AUGUST 2004
D Control Inputs V_IH/V_IL Levels Are
Referenced to V_CCA Voltage
D V_CC Isolation Feature − If Either V_CC Input
Is at GND, Both Ports Are in the
High-Impedance State
D Overvoltage-Tolerant Inputs/Outputs Allow
Mixed-Voltage-Mode Data Communications
D Fully Configurable Dual-Rail Design Allows
Each Port to Operate Over the Full 1.2-V to
3.6-V Power-Supply Range
D I_off Supports Partial-Power-Down Mode
Operation
DGG OR DGV PACKAGE
(TOP VIEW)
1DIR 1
1B1 2
1B2 3
GND 4
1B3 5
1B4 6
V_CCB 7
1B5 8
1B6 9
GND 10
48 1OE
47 1A1
46 1A2
45 GND
44 1A3
43 1A4
42 V_CCA
41 1A5
40 1A6
39 GND
D I/Os Are 4.6-V Tolerant
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Protection Exceeds JESD 22
− 4000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
− 1000-V Charged-Device Model (C101)
description/ordering information
1B7 11
1B8 12
2B1 13
2B2 14
GND 15
2B3 16
2B4 17
V_CCB 18
2B5 19
2B6 20
38 1A7
37 1A8
36 2A1
35 2A2
34 GND
33 2A3
32 2A4
31 V_CCA
30 2A5
29 2A6
This 16-bit noninverting bus transceiver uses two
GND 21 28 GND
separate configurable power-supply rails. The
2B7 22 27 2A7
SN74AVC16T245 is optimized to operate with
2B8 23 26 2A8
V_CCA/V_CCB set at 1.4 V to 3.6 V. It is operational
with V_CCA/V_CCB as low as 1.2 V. The A port is
designed to track V_CCA. V_CCA accepts any supply
voltage from 1.2 V to 3.6 V. The B port is
2DIR 24 25 2OE
designed to track V_CCB. V_CCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal
low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC16T245 is designed for asynchronous communication between data buses. The device transmits
data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the
direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are
effectively isolated.
The SN74AVC16T245 is designed so that the control pins (1DIR, 2DIR, 1OE, and 2OE) are supplied by V_CCA.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TSSOP − DGG
Tape and reel SN74AVC16T245DGGR AVC16T245
−40°C to 85°C
TVSOP − DGV
VFBGA − GQL
VFBGA − ZQL (Pb-free)
Tape and reel
Tape and reel
SN74AVC16T245DGVR
SN74AVC16T245GQLR
SN74AVC16T245ZQLR
WF245
WF245
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are}
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright  2004, Texas Instruments Incorporated
1